Key takeaways
- Compare the best jigsaws for curves, cutouts and bevel work, with five corded and cordless picks matched to wood, metal and laminate jobs for home shops.
The best jigsaws pair a motor that holds speed under load with a variable speed control, orbital action you can dial up or down, and a tool-free blade change that accepts T-shank blades. For most home shops, a 5 to 7 amp corded model or an 18 to 20 volt cordless model covers curves, sink cutouts, bevel work and sheet goods without drama. The five picks below span premium, mid-range and budget tiers, and each one is matched to a clear job: corded precision, cordless freedom on a battery platform you may already own, or simple household cutting.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose a Jigsaw
- Bosch JS470E Top-Handle Jig Saw
- DEWALT DCS334B 20V MAX XR Jig Saw
- Makita XVJ03Z 18V LXT Jig Saw
- Ryobi PCL525B ONE+ 18V Jig Saw
- BLACK+DECKER BDEJS600C Jig Saw
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Jigsaw
Power source comes first. Corded jigsaws deliver steady power for long sessions in thick stock, and they never pause for a battery swap. Cordless models trade a little of that staying power for freedom of movement, which matters on ladders, roofs and job sites with few outlets. If you already own batteries from a major platform, a bare cordless tool on that platform is usually the sensible route.
Motor output and speed range shape cut quality. Corded saws are rated in amps, and 6.5 to 7 amps holds speed well in hardwood and two-by lumber. Cordless saws lean on brushless motors for efficiency. Either way, look for a top speed between 3,000 and 3,200 strokes per minute and a low end slow enough for metal and laminate, where a gentle pace prevents chipped edges and melted plastic.
Stroke length and orbital action control how aggressive the cut feels. A stroke near one inch moves material quickly, while a shorter stroke near three quarters of an inch favors control in thin sheet goods. Orbital settings swing the blade forward on the upstroke: high settings clear chips fast in framing lumber, and the lowest setting or straight mode gives the smoothest finish in plywood and veneer.
Blade changes and shoe design decide how pleasant the saw is day to day. T-shank blades dominate the market, and a lever-action or tool-less clamp lets you swap a hot blade without hunting for a hex key. A sturdy shoe that bevels to 45 degrees on both sides, detents at common angles, and a dust blower or vacuum port all help you follow a line and see the cut as it happens.
Bosch JS470E Top-Handle Jig Saw
The Bosch JS470E is the corded precision pick in this group, built around a 7.0 amp motor and a variable speed dial that pairs with an accelerator trigger. The dial sets the ceiling across six steps from 500 to 3,100 strokes per minute, and the trigger feathers the speed within that limit, which is a calm way to approach tight scroll work in hardwood. Its die-cast foot carries a steel insert, an on-board bevel wrench, and a multi-directional blade clamp that grips T-shank blades firmly.
Four orbital settings let you move from a fine finish stroke to an aggressive clearing stroke, and the adjustable dust blower keeps the pencil line visible. The tool-less blade change uses an ejection lever, so a hot blade drops out without your fingers near the edge. A non-marring overshoe and an anti-splinter insert come in the box, along with a T-shank blade and a carrying case. This is a premium tier pick for woodworkers who cut curves often and want corded consistency.
Specs
- Motor: 7.0 amp, 120 volt corded
- Speed: 500 to 3,100 strokes per minute, dial plus trigger control
- Stroke length: 1 inch
- Orbital action: 4 settings
- Cutting capacity: 5-7/8 inches in wood, 3/8 inch in steel
- Bevel capacity: 45 degrees
- Blade type: T-shank, tool-less change with ejection lever
- Weight: 5.6 lb
- Included: non-marring overshoe, anti-splinter insert, blade, bevel wrench, carrying case
- Warranty: 1 year
DEWALT DCS334B 20V MAX XR Jig Saw
The DEWALT DCS334B brings a brushless motor to the 20V MAX platform and tops this group for cordless speed, reaching 3,200 strokes per minute. A variable speed trigger and a separate speed dial give two layers of control, and the four-position orbital control adjusts the aggressiveness of the stroke for fast rip cuts or fine finish work. The keyless lever-action blade change accepts T-shank blades, and an all-metal keyless shoe bevels with detents at 0, 15, 30 and 45 degrees.
An LED light and a built-in dust blower keep the cut line clear, and the grip is sized for control during long curves. At 4.2 lb for the bare tool, it is the lightest saw here, which helps on overhead and vertical work. It ships as a bare tool, so it suits shops already holding 20V MAX batteries and a charger. This premium tier cordless pick fits remodelers and cabinet installers who move around a site all day.
Specs
- Motor: brushless, 20 volt MAX battery platform
- Speed: up to 3,200 strokes per minute, trigger plus dial control
- Stroke length: 1 inch
- Orbital action: 4 positions
- Bevel capacity: 45 degrees with detents at 0, 15, 30 and 45 degrees
- Blade type: T-shank, keyless lever-action change
- Lighting: LED work light with dust blower
- Weight: 4.2 lb, tool only
- Included: jig saw only, battery and charger sold separately
Makita XVJ03Z 18V LXT Jig Saw
The Makita XVJ03Z is a mid-range cordless option for the 18V LXT platform, with a Makita-built motor driving a one inch stroke at up to 2,600 strokes per minute. The lower top speed is paired with three orbital settings plus straight cutting, which covers the range most users need: gentle strokes for laminate and sheet metal, and stronger orbital swing for softwood and framing stock. A variable speed control dial keeps the pace steady without constant trigger pressure.
Blade changes are tool-less for T-shank blades, the base bevels to 45 degrees on either side, and a dust blower clears the line ahead of the blade. Makita lists cutting capacity at 5-5/16 inches in wood and 3/8 inch in steel, which is plenty for countertop cutouts, door trimming and flooring work. With a battery fitted it weighs 5.3 lb, and it is sold as a bare tool. For LXT owners who want a composed, mid-priced saw for site and shop, this one fills the slot neatly.
Specs
- Motor: Makita-built, 18 volt LXT battery platform
- Speed: 0 to 2,600 strokes per minute, variable speed dial
- Stroke length: 1 inch
- Orbital action: 3 settings plus straight cutting
- Cutting capacity: 5-5/16 inches in wood, 3/8 inch in steel
- Bevel capacity: 45 degrees, left or right
- Blade type: T-shank, tool-less change
- Weight: 5.3 lb with battery
- Included: jig saw only, battery and charger sold separately
Ryobi PCL525B ONE+ 18V Jig Saw
The Ryobi PCL525B is the mid-range value pick for the ONE+ system, with a variable speed trigger that runs from 0 to 3,000 strokes per minute and four orbital settings to match the material. A one inch stroke gives it real clearing power in pine, plywood and PVC, and the tool-free blade change accepts T-shank blades in seconds. The base adjusts for bevel cuts up to 45 degrees in both directions, with positive stops at 0, 15, 30 and 45 degrees.
A non-marring shoe protects finished surfaces, and an LED work light brightens the line inside cabinets and under counters. Published weight is 4.4 lb, so it stays comfortable through a long list of cuts. The box holds the saw, a non-marring shoe, a wood cutting blade, a hex wrench and the operator manual; any ONE+ 18 volt battery runs it, and Ryobi backs it with a 3-year limited warranty. For homeowners building out a ONE+ collection, this is an easy addition.
Specs
- Motor: 18 volt ONE+ battery platform
- Speed: 0 to 3,000 strokes per minute, variable speed trigger
- Stroke length: 1 inch
- Orbital action: 4 settings
- Bevel capacity: 45 degrees, left or right, with positive stops
- Blade type: T-shank, tool-free change
- Lighting: LED work light
- Weight: 4.4 lb
- Included: saw, non-marring shoe, wood cutting blade, hex wrench, manual
- Warranty: 3-year limited
BLACK+DECKER BDEJS600C Jig Saw
The BLACK+DECKER BDEJS600C is the budget tier pick, a 5.0 amp corded saw with variable speed up to 3,000 strokes per minute. Its headline feature is CurveControl, a set of four orbital settings customized for the cut at hand: tight curves, smooth curves, straight cuts and fast straight cuts. The three quarter inch stroke suits plywood, pine, trim and craft stock, and the adjustable shoe tilts for bevel cuts up to 45 degrees.
A wire guard preserves a clear line of sight to the blade, and the saw accepts both T-shank and U-shank blades, which is handy if you already own a drawer of older blades. Published weight is 4.6 lb, light enough for shelf building, door trimming and weekend projects around the house. A jig saw blade is included, and the warranty runs two years. For occasional users who want a capable saw without stepping into premium territory, this one makes a strong case.
Specs
- Motor: 5.0 amp, 120 volt corded
- Speed: up to 3,000 strokes per minute, variable speed
- Stroke length: 3/4 inch
- Orbital action: 4 CurveControl settings
- Bevel capacity: 45 degrees
- Blade type: T-shank and U-shank
- Sight line: wire guard for a clear view of the cut
- Weight: 4.6 lb
- Included: jig saw, jig saw blade
- Warranty: 2-year limited
Frequently Asked Questions
What is the difference between a corded and a cordless jigsaw?
A corded jigsaw draws steady power from an outlet, so its speed stays constant through long cuts in thick stock, and it is ready whenever you are. A cordless jigsaw runs on a battery platform, which frees you from cords on ladders and job sites but adds battery weight and a runtime limit. Cutting power overlaps a great deal at the top of both ranges, so the platform you already own often decides the question.
Which blade type do most jigsaws use?
Most current jigsaws use T-shank blades, which lock into a tool-less clamp with a positive click and stay put during aggressive orbital cutting. Older and some budget saws also accept U-shank blades, which rely on a set screw. Every saw in this guide takes T-shank blades, and the BLACK+DECKER also accepts U-shank blades, which helps if you have older blades on hand.
What does orbital action do on a jigsaw?
Orbital action swings the blade forward as it rises, so the teeth clear chips faster and cut more aggressively through wood. Higher settings speed up rough work in framing lumber and softwood, while the lowest setting, or a straight stroke, leaves a smoother edge in plywood, laminate and veneer. Matching the setting to the material is the simplest way to improve cut quality without changing blades.
How thick a board can a jigsaw cut?
Cutting capacity depends on stroke length, blade length and motor strength. The corded Bosch in this guide is rated at 5-7/8 inches in wood, and the Makita cordless is rated at 5-5/16 inches, though clean and accurate results are easiest in stock up to about two inches thick. For steel, ratings near 3/8 inch are common, and a slower speed with a metal cutting blade gives the best outcome.
Conclusion
Pick the Bosch JS470E if you want corded precision and a deep spec sheet for furniture-grade curves. Choose the DEWALT DCS334B for the fastest cordless cutting on the 20V MAX platform, or the Makita XVJ03Z if your batteries are LXT and your work favors control over raw speed. The Ryobi PCL525B rounds out a ONE+ kit with real capability at a mid-range tier, and the BLACK+DECKER BDEJS600C covers household cutting on a budget with a friendly set of curve settings. Match the saw to your battery platform first, then to the thickest material you cut often, and any of these five will serve well.
Related articles