Key takeaways
- Compare the best wood lathes for home shops by swing, capacity, motor power and speed range, with five benchtop picks for bowls, spindles and pens.
The best wood lathe for most home shops is a benchtop midi lathe with a 12 inch swing, at least 16 inches between centers, a cast iron bed, and a speed range that drops low enough for roughing out unbalanced bowl blanks. Of the five models compared below, the JET JWL-1221VS offers the widest electronic speed range and the strongest motor, the two RIKON minis pair heavy castings with simple belt driven speeds, the WEN LA3424 gives the most capacity in the budget tier, and the Shop Fox W1704 suits pens and small spindle work in tight spaces.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose a Wood Lathe
- JET JWL-1221VS Wood Lathe
- RIKON 70-100 Mini Lathe
- RIKON 70-105 Mini Lathe
- WEN LA3424 Benchtop Wood Lathe
- Shop Fox W1704 Benchtop Lathe
- Which Wood Lathe Fits Your Projects
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Wood Lathe
Swing over bed
Swing is the largest diameter workpiece that fits over the bed, and it sets the ceiling for bowl work. An 8 inch swing limits you to small bowls and boxes, a 10 inch swing covers modest bowls and platters, and a 12 inch swing handles the bowl sizes most home turners eventually want to make. Measure your project plans against the swing figure before anything else, because no accessory can add diameter capacity later.
Distance between centers
This figure is the longest spindle the lathe holds between the headstock and tailstock. Pens and bottle stoppers need only a few inches, tool handles and chair spindles need more, and long work such as baseball bats needs 30 inches or beyond, which usually means a bed extension or a floor standing model. Most benchtop lathes land between 13 and 21 inches, which covers the majority of hobby projects.
Motor power and low speed torque
Motors on benchtop lathes run from one third of a horsepower up to one horsepower. Small spindle work asks very little of a motor, while roughing a large, out of round bowl blank at low speed asks a great deal. If bowls are your goal, favor the stronger motors in this group and a speed range with a genuinely low bottom end, since a blank that is still unbalanced should turn slowly until it runs true.
Speed control
Belt driven lathes change speed by moving a belt between pulley steps, which is simple, durable, and inexpensive. Electronic variable speed models adjust with a dial, sometimes across two or three belt ranges, and they hold a chosen speed more precisely during a cut. A digital readout is a useful extra because it shows the actual spindle speed rather than a pulley estimate.
Spindle thread and taper
Most lathes in this class use a 1 inch by 8 TPI spindle thread with MT2 tapers in the headstock and tailstock, which matches the widest range of chucks, faceplates, and centers sold today. The Shop Fox below uses the smaller MT1 taper and a 3/4 inch by 16 TPI thread, so check accessory compatibility before building a collection around it.
Weight and bed material
Cast iron beds absorb vibration, and vibration is what turns a smooth cut into chatter marks. Heavier lathes in this roundup weigh between about 70 and 121 pounds, and that mass pays off most when roughing irregular blanks. A light lathe is easier to move and store, which matters in a shared garage, but it should be bolted or clamped to a solid bench for larger work.
JET JWL-1221VS Wood Lathe
The JET JWL-1221VS sits at the premium end of the benchtop class. Its 1 horsepower motor and electronic variable speed control cover three ranges that together run from 60 to 3,600 RPM, so it can creep through the roughing stage of a big blank and still spin fast enough for fine spindle finishing. A digital readout shows the selected speed, a ratchet style belt tension system makes range changes quick, and 24 position indexing supports layout work such as fluting and evenly spaced details.
Capacity is generous for a machine that still fits on a bench, with a 12-1/2 inch swing and 20-1/4 inches between centers. The spindle uses the common 1 inch by 8 TPI thread with MT2 tapers, and the box includes 6 inch and 10 inch tool rests, a spur center, a live center, and a 3 inch faceplate. At about 121 pounds, the cast iron build stays planted under loads that would set lighter lathes walking across the bench.
Specs
- Motor: 1 HP, 115V, single phase
- Swing over bed: 12-1/2 inches
- Distance between centers: 20-1/4 inches
- Speed ranges: 60 to 900, 110 to 1,800, and 220 to 3,600 RPM, electronic variable speed with digital readout
- Spindle thread: 1 inch by 8 TPI, MT2 headstock and tailstock tapers
- Indexing: 24 positions
- Included: 6 inch and 10 inch tool rests, spur center, live center, 3 inch faceplate
- Weight: about 121 pounds
- Model number: 719200
- Warranty: 5 years
RIKON 70-100 Mini Lathe
The RIKON 70-100 is a mid-range mini lathe built around a heavy casting and a simple six speed belt drive. Its 12 inch swing matches the largest benchtop models in this group, while the 16 inch distance between centers covers spindles, handles, and small table parts. Bed extensions are available for this model, so length capacity can grow later without replacing the machine.
The 1/2 horsepower TEFC motor drives speeds of 430, 810, 1,230, 1,810, 2,670, and 3,900 RPM. That low first step is useful for roughing bowl blanks, and the high top step suits small diameter spindle finishing. A 12 position indexing head supports decorative layout work, the tailstock is self ejecting for quicker center changes, and both tapers are MT2 with a 1 inch by 8 TPI spindle thread, keeping accessory choices wide open.
Specs
- Motor: 1/2 HP TEFC, 5.7 amps, 115V
- Swing over bed: 12 inches
- Distance between centers: 16 inches, extendable with optional bed extensions
- Speeds: 6 speeds, 430, 810, 1,230, 1,810, 2,670, and 3,900 RPM
- Spindle thread: 1 inch by 8 TPI, MT2 headstock and tailstock tapers
- Indexing: 12 positions
- Tailstock: self ejecting
- Weight: 89 pounds
RIKON 70-105 Mini Lathe
The RIKON 70-105 trades a little swing for a little length. The swing is 10 inches, which still covers small and medium bowls, while the 18 inches between centers gives more room for spindles than its 70-100 sibling. It is a sensible pick for turners whose work leans toward handles, legs, and long thin pieces with occasional bowl work on the side.
A 1/2 horsepower TEFC motor and five belt speeds of 500, 1,175, 1,850, 2,225, and 3,200 RPM handle that workload comfortably. Speed changes are made by moving the belt on the pulley stack, with easy access to the belt housing. The spindle thread is 1 inch by 8 TPI with MT2 tapers at both ends, the bed and body are cast iron, and the net weight of 75 pounds keeps the machine steady without making it a two person move.
Specs
- Motor: 1/2 HP TEFC, 3.7 amps, 115V
- Swing over bed: 10 inches
- Distance between centers: 18 inches
- Speeds: 5 speeds, 500, 1,175, 1,850, 2,225, and 3,200 RPM
- Spindle thread: 1 inch by 8 TPI, MT2 headstock and tailstock tapers
- Construction: cast iron bed and body
- Weight: 75 pounds
- Warranty: 5 years
WEN LA3424 Benchtop Wood Lathe
The WEN LA3424, also sold under the 3424T model name, delivers the most capacity in the budget tier: a 12 inch swing and 18 inches between centers, dimensions that match or beat mid-range machines. For a first lathe that will not be outgrown the moment bowls become interesting, that combination is the main attraction.
The 4.5 amp motor runs five belt speeds of 520, 900, 1,400, 2,150, and 3,400 RPM. The 520 RPM low step is slow enough for roughing modest bowl blanks, and the upper steps cover spindle work and finishing. Both the headstock and tailstock use MT2 tapers with a 1 inch by 8 TPI spindle thread. The package includes a 3-1/8 inch faceplate, a spur center, a live center, an 8 inch tool rest, and an onboard accessory holder, and the cast iron machine weighs 70.3 pounds.
Specs
- Motor: 4.5 amps, 120V, 60 Hz
- Swing over bed: 12 inches
- Distance between centers: 18 inches
- Speeds: 5 speeds, 520, 900, 1,400, 2,150, and 3,400 RPM
- Spindle thread: 1 inch by 8 TPI, MT2 headstock and tailstock tapers
- Included: 3-1/8 inch faceplate, spur center, live center, 8 inch tool rest, accessory holder
- Construction: cast iron
- Weight: 70.3 pounds
Shop Fox W1704 Benchtop Lathe
The Shop Fox W1704 is the compact budget option, sized for pens, bottle stoppers, small bowls, and lidded boxes. Its 8 inch swing and 13 inches between centers define a small project envelope, and within that envelope the cast iron construction runs steadier than its light 49.3 pound weight might suggest.
A 1/3 horsepower motor pairs with a variable speed dial covering 700 to 3,200 RPM, so speed changes need no belt moves at all, a genuine convenience on small work where speed adjustments are frequent. The spindle thread is 3/4 inch by 16 TPI and the tapers are MT1, a smaller standard than the other four lathes here, so plan accessories around that fitting. The lathe includes 4-1/2 inch and 7 inch tool rests and a 5-3/4 inch faceplate.
Specs
- Motor: 1/3 HP, 2 amps, 110V, single phase
- Swing over bed: 8 inches
- Distance between centers: 13 inches
- Speed: variable, 700 to 3,200 RPM by dial
- Spindle thread: 3/4 inch by 16 TPI, MT1 headstock and tailstock tapers
- Included: 4-1/2 inch and 7 inch tool rests, 5-3/4 inch faceplate
- Construction: cast iron
- Weight: 49.3 pounds
Which Wood Lathe Fits Your Projects
For bowls first and everything else second, the JET JWL-1221VS and the RIKON 70-100 lead this group, since both combine a 12 inch or greater swing with low working speeds. For spindle leaning work on a mid-range budget, the RIKON 70-105 puts its capacity into length instead. For the most room at a budget tier, the WEN LA3424 matches the swing of the leaders and adds 18 inches between centers. For pens and small turnings in a tight corner of the shop, the Shop Fox W1704 is the easiest machine here to store, move, and set up.
Whichever model you choose, budget bench space for the lathe plus room at both ends for long stock, and plan on a chuck, a set of turning tools, and sharpening gear as follow up purchases, since every lathe here arrives ready for between centers work and faceplate work but not with a scroll chuck in the box.
Frequently Asked Questions
What size wood lathe do I need for turning bowls?
Choose a lathe whose swing over bed is at least as large as the bowl diameter you want to finish, and remember that a rough blank needs clearance before it is rounded. A 12 inch swing, as on the JET, the RIKON 70-100, and the WEN, covers the bowl sizes most home turners make, while 8 and 10 inch swings suit small bowls only.
Is electronic variable speed better than a belt drive on a wood lathe?
Electronic variable speed changes the spindle speed with a dial and holds it under load, which is convenient when a single project needs several speeds. Belt drive lathes are simpler and less costly, and their stepped speeds cover the same working range for most projects. The JET in this group uses electronic control across three ranges, while the RIKON and WEN models use belt steps.
What does MT2 mean on a wood lathe specification?
MT2 is a Morse taper size, the friction fit socket used in the headstock and tailstock to hold spur centers, live centers, drill chucks, and similar fittings. MT2 is the common standard on mini and midi lathes, so accessories are widely available. The Shop Fox W1704 uses the smaller MT1 taper, which narrows accessory choice somewhat.
Can a benchtop wood lathe turn table legs and baseball bats?
Table legs are within reach of the longer benchtop models when the leg blank fits between centers, and the RIKON 70-105 and WEN LA3424 each offer 18 inches. Full length baseball bats run longer than any benchtop capacity in this group, so bat turning calls for a bed extension where one is offered, or a floor standing lathe.
Conclusion
The best wood lathes balance capacity, low speed control, and mass. The JET JWL-1221VS is the most capable benchtop machine here, with the strongest motor, the widest speed range, and the longest bed. The RIKON 70-100 and 70-105 cover the mid-range with heavy castings and straightforward belt speeds, one favoring swing and the other favoring length. The WEN LA3424 brings full midi capacity to the budget tier, and the Shop Fox W1704 keeps small project turning compact and simple. Match the swing and length figures to the projects on your list, confirm the spindle thread and taper match the accessories you plan to buy, and the lathe you pick will serve for years of turning.
Related articles
- Best Drill Presses: 5 Benchtop Picks for Home Shops
- Best Mini Fridges for Dorms, Offices and Small Rooms
- Best LED Shop Lights for Garages and Workshops Compared
- Best Orbital Sanders for Wood and Home Projects: 5 Picks
- Best Electric Planers: 5 Picks for Doors and Boards
- Best Jigsaws: 5 Corded and Cordless Picks for Clean Cuts