Key takeaways
- See the best angle grinders for cutting and grinding metal, tile and masonry, with motor, wheel and switch specs for five corded and cordless picks.
- Top Pick: DEWALT DWE402 4-1/2 Inch Angle Grinder
- Runner-up: Milwaukee 2880-20 M18 FUEL 4-1/2 / 5 Inch Grinder
- Also consider: Makita 9557PBX1 4-1/2 Inch Paddle Switch Grinder Kit
If you want one answer up front, the DEWALT DWE402 is the best angle grinder for most workshops: an 11 amp corded motor, 11,000 RPM, a paddle switch, and a tool-free guard cover nearly every cutting and grinding job a 4-1/2 inch wheel can handle. If you would rather cut the cord, the Milwaukee 2880-20 M18 FUEL delivers corded-class output on an 18 volt battery platform. Below those two sit a lighter Makita kit, a budget Metabo HPT kit that ships with wheels and a case, and a compact Bosch grinder for lighter duty work.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose an Angle Grinder
-
- DEWALT DWE402 4-1/2 Inch Angle Grinder
-
- Milwaukee 2880-20 M18 FUEL 4-1/2 / 5 Inch Grinder
-
- Makita 9557PBX1 4-1/2 Inch Paddle Switch Grinder Kit
-
- Metabo HPT G12SR4 4-1/2 Inch Angle Grinder Kit
-
- Bosch 1375A 4-1/2 Inch Angle Grinder
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose an Angle Grinder
Wheel size. The 4-1/2 inch format dominates this category for good reason. It is large enough to cut rebar, angle iron, tile, and pavers, yet small enough to control with one hand during detail grinding. Every pick in this guide uses 4-1/2 inch wheels, and the Milwaukee also accepts 5 inch wheels for a little extra cutting depth.
Motor power. On corded models, amperage is the figure to compare. A 6 to 7 amp motor handles sharpening, rust removal, and light cutting. An 11 amp motor like the one in the DEWALT keeps its speed under load during heavy grinding and long cuts in thick steel. On cordless models, look at the platform voltage and whether the maker publishes a corded-equivalent output figure.
Switch style. A paddle switch stops the wheel the moment you release it, which many users prefer for cutting. A slide switch locks on for continuous grinding, which suits long surface work but demands more care. Neither is wrong; match the switch to the work you do most.
Spindle and guards. All five grinders here use a 5/8-11 spindle thread, the common North American fitting, so wheels and accessories swap freely between them. A guard that adjusts without tools saves real time when you move between cutting and grinding positions.
Corded or cordless. Corded grinders deliver full power for as long as you work and weigh less because there is no battery. Cordless grinders free you from outlets and extension cords, which matters on ladders, roofs, and large properties, but the battery and charger are usually sold apart from the bare tool.
1. DEWALT DWE402 4-1/2 Inch Angle Grinder
The DWE402 is the grinder that anchors this list because it pairs the strongest corded motor here with the control features fabricators ask for. Its 11 amp AC/DC motor turns a 4-1/2 inch wheel at 11,000 RPM and is rated at 1,400 watts of maximum output, so it holds speed while grinding welds flat or cutting through thick stock. The paddle switch gives you a dead-man control that stops the wheel as soon as your grip comes off.
DEWALT builds in three systems that extend tool life and speed up wheel changes. The Dust Ejection System pushes abrasive dust away from the motor internals, the One-Touch Guard rotates a full 360 degrees with a single hand movement, and the Quick-Change wheel release lets you swap wheels without a wrench. At 6.2 pounds it is the heaviest corded pick here, but the weight reads as density rather than bulk, and the two-position side handle helps you keep the tool planted during aggressive grinding.
Specs
- Motor: 11 amp AC/DC, 1,400 watts maximum output
- No-load speed: 11,000 RPM
- Wheel diameter: 4-1/2 inch
- Switch: paddle switch
- Spindle thread: 5/8-11
- Weight: 6.2 pounds
- Included: two-position side handle, 4-1/2 inch One-Touch Type 27 guard, wrench
- Tier: mid-range
Choose the DWE402 if your grinder will see weekly use on steel, welds, and masonry and you want one corded tool that does not feel underpowered on any of it.
2. Milwaukee 2880-20 M18 FUEL 4-1/2 / 5 Inch Grinder
The 2880-20 is the cordless pick for anyone already holding Milwaukee M18 batteries. Its POWERSTATE brushless motor generates the equivalent of 11 amp corded power and spins the wheel at up to 8,500 RPM, and Milwaukee rates it for up to 135 cuts per charge in 3/8 inch rebar with a suitable battery fitted. It accepts both 4-1/2 inch and 5 inch wheels, which gives it the deepest cut of any tool in this guide.
Safety electronics set it apart from the corded field. An electronic clutch helps guard against kickback if the wheel binds, and the paddle switch has no lock, so the tool stops when you let go. Because it is sold as a bare tool, the purchase only makes sense if you own M18 batteries or plan to buy into the platform; figure a battery and charger into your plans if you do not. For site work away from outlets, that trade is easy to justify.
Specs
- Motor: POWERSTATE brushless, 11 amp corded-equivalent output
- Battery platform: Milwaukee M18, 18 volt (battery and charger sold separately)
- No-load speed: 8,500 RPM
- Wheel diameter: 4-1/2 inch and 5 inch
- Switch: paddle switch, no lock
- Spindle thread: 5/8-11
- Protection: electronic clutch for kickback events
- Tier: premium
Choose the 2880-20 if mobility matters more than runtime limits and your shelves already hold M18 packs.
3. Makita 9557PBX1 4-1/2 Inch Paddle Switch Grinder Kit
Makita’s 9557PBX1 packages the respected 9557PB grinder as a complete kit in an aluminum case, with grinding wheels and a diamond blade in the box. The 7.5 amp motor reaches 11,000 RPM, matching the DEWALT on speed with less torque on tap, and the slim barrel grip and 4.6 pound weight make it the easiest corded grinder here to run one-handed during light cutting and surface work.
Makita seals the motor and bearings with a labyrinth construction that keeps dust and debris out of the tool, and zigzag varnish on the armature adds a second barrier against contaminants. The paddle switch carries an AC/DC rating, so the grinder can also run off DC power sources such as welders found on job sites. Separate guards for grinding and cut-off work are included, which keeps you from running a cutting wheel under the wrong guard.
Specs
- Motor: 7.5 amp
- No-load speed: 11,000 RPM
- Wheel diameter: 4-1/2 inch
- Switch: paddle switch, AC/DC capable
- Spindle thread: 5/8-11 UNC
- Overall length: 10-3/4 inches
- Weight: 4.6 pounds
- Included: aluminum case, grinding wheels, diamond blade, side handle, grinding and cut-off guards
- Tier: mid-range
Choose the 9557PBX1 if you want a lighter corded grinder that arrives as a ready-to-work kit rather than a bare tool in a cardboard box.
4. Metabo HPT G12SR4 4-1/2 Inch Angle Grinder Kit
The G12SR4 is the value pick that still comes from a major tool maker. Its 6.2 amp motor produces up to 980 watts of output and turns the wheel at 10,000 RPM, enough for cutting tile, trimming metal, sharpening blades, and cleaning up welds around the home and farm. At 4.0 pounds with a compact grip, it is the lightest full kit here and the least tiring during overhead or extended work.
Metabo HPT includes five abrasive depressed-center grinding wheels, a wheel guard, a side handle, a spanner wrench, and a hard carrying case, so the box holds everything you need for a first grinding session. The slide switch has a lock-on for continuous runs, which suits long grinding passes; remember to switch it off before setting the tool down. The removable side handle can be fitted at a forward-canted angle for a more natural grip.
Specs
- Motor: 6.2 amp, up to 980 watts maximum output
- No-load speed: 10,000 RPM
- Wheel diameter: 4-1/2 inch
- Switch: slide switch with lock-on
- Spindle thread: 5/8-11
- Overall length: 10-3/16 inches
- Weight: 4.0 pounds
- Included: five abrasive grinding wheels, wheel guard, side handle, spanner wrench, hard case
- Tier: budget
Choose the G12SR4 if you want a complete, light kit for household and light workshop grinding without paying for power you will rarely use.
5. Bosch 1375A 4-1/2 Inch Angle Grinder
The Bosch 1375A has been a fixture of the compact grinder class for years. Its 6 amp motor delivers 11,000 RPM in a body that measures 10.5 inches long and weighs 3.75 pounds, the lightest figure in this guide. That makes it a sensible pick for users who grind in short sessions, work in tight spaces, or simply prefer a tool that does not fight back during one-handed cuts.
Bosch fits a lock-on side switch for continuous operation, a removable brush cover for quick brush changes, and Service Minder brushes that shut the tool down when preventive maintenance is due. The two-position side handle mounts on either side of the gear head. Power is modest next to the DEWALT, so thick steel cutting will take longer, but for sharpening, deburring, tile scoring, and rust removal the 1375A covers the brief in a smaller, lighter package.
Specs
- Motor: 6.0 amp
- No-load speed: 11,000 RPM
- Wheel diameter: 4-1/2 inch
- Switch: lock-on side switch
- Spindle thread: 5/8-11 UNC
- Length: 10.5 inches
- Weight: 3.75 pounds
- Included: grinding wheel guard, auxiliary handle, abrasive grinding wheel
- Tier: budget
Choose the 1375A if low weight and compact size matter more to you than maximum grinding power.
Frequently Asked Questions
What size angle grinder is best for home and workshop use?
A 4-1/2 inch grinder is the right size for most home and workshop work. It cuts rebar, bolts, tile, and pavers, grinds welds and sharpens blades, and stays light enough to control with confidence. Larger 6 and 7 inch grinders cut deeper but are heavier and harder to handle for detail work.
Is a corded or cordless angle grinder better?
Corded grinders give you full power for unlimited runtime and usually weigh less, which suits bench and workshop work. Cordless grinders trade some runtime for freedom of movement, which suits roofs, fences, and large sites. If you already own batteries from a major 18 or 20 volt platform, a bare cordless tool is often the simplest route.
What is the difference between a paddle switch and a slide switch?
A paddle switch only runs while you hold it down, so the wheel stops the moment you release your grip, which many users prefer for cutting. A slide switch can lock on for continuous grinding during long passes. Both styles appear in this guide, so you can match the switch to the work you do most.
Can an angle grinder cut metal and masonry?
Yes, with the correct wheel fitted. Abrasive cut-off wheels and diamond blades cut metal, tile, stone, and concrete, while thicker depressed-center wheels handle grinding and surface prep. Always match the wheel type to the material, fit the guard that suits the wheel, and let the wheel reach full speed before it touches the work.
Conclusion
For most buyers, the DEWALT DWE402 is the angle grinder to get: the strongest corded motor here, a paddle switch, and tool-free guard and wheel changes. The Milwaukee 2880-20 is the premium cordless route for M18 owners, while the Makita 9557PBX1 kit suits anyone who wants a lighter corded tool with wheels and a case included. On a budget, the Metabo HPT G12SR4 kit and the compact Bosch 1375A cover lighter grinding and cutting work at the two lowest tiers in this guide. Whichever you choose, confirm the listing matches the model number in the reference table below before you order, since several of these grinders are sold in multiple kit configurations.
Related articles




