Updated Nov 20, 2026· 10 min read

Key takeaways

  • Compare extension ladders for roof, gutter and siding work, including fiberglass, telescoping and multi-position models with duty ratings and reach.
⭐ Key Takeaways
Quick answer: Our top pick is Louisville Ladder FE3224 Fiberglass Extension Ladder, with Werner D6224-2 Fiberglass Extension Ladder as a strong alternative.

The best extension ladder for most two-story homes is a 24 foot fiberglass model with a Type IA duty rating, because that size reaches a typical roof edge with room to spare and the non-conductive rails are the safer choice around overhead wiring. The Louisville Ladder FE3224 is that ladder, and it leads this guide. If storage space is tight, the Xtend & Climb 785P collapses to a fraction of its working length, while the Little Giant Velocity M22 and Werner MT-22 fold into several ladder types in one frame. The Werner D6224-2 rounds out the list as a proven mid-range fiberglass option from the most common ladder brand on job sites.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • How to Choose an Extension Ladder
    1. Louisville Ladder FE3224 Fiberglass Extension Ladder
    1. Werner D6224-2 Fiberglass Extension Ladder
    1. Little Giant Velocity M22 Multi-Position Ladder
    1. Werner MT-22 Telescoping Multi-Ladder
    1. Xtend & Climb 785P Telescoping Ladder
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

How to Choose an Extension Ladder

Match the ladder size to the height you need to reach. The size printed on an extension ladder is the combined length of both sections, not the height it reaches in use. The two sections overlap, so a 24 foot ladder has a maximum working length of about 21 feet, and once it leans at the proper angle the top sits lower still. A common rule is to pick a ladder whose maximum reach, as published by the maker, is at least a few feet above the gutter line or support point you need to touch. For a single-story home, a 16 to 20 foot ladder usually covers gutter work. For a two-story home, 24 to 28 foot models are the usual fit. If you plan to step onto a roof, the ladder should extend at least three feet above the roof edge so you have a handhold while moving on and off.

Check the duty rating before anything else. Ladder duty ratings follow the ANSI type scale. Type IA is rated for 300 pounds, Type I for 250 pounds, Type II for 225 pounds, and Type III for 200 pounds. The rating covers your body weight plus clothing, tools, and any materials you carry up with you. Most homeowners who carry paint cans, shingles, or a nail gun should stay with Type IA, since the stronger rail construction also flexes less at full extension.

Choose fiberglass or aluminum based on where you work. Fiberglass rails do not conduct electricity, which makes them the safer pick near service drops, meter bases, and overhead lines. Fiberglass is heavier, and it should be stored out of constant direct sunlight. Aluminum is lighter and easier to carry and raise alone, but it conducts electricity and should never be used where contact with wiring is possible. Telescoping and multi-position ladders are almost always aluminum, since the folding joints and sliding sections add weight of their own.

Look at the rung lock and the feet. On a two-section ladder, the rung locks hold the fly section at the height you set, and a rope and pulley system makes longer ladders easier to raise. Swivel safety shoes that grip on both flat and soft ground help the base stay planted. On telescoping models, each rung locks on its own, so confirm the locking indicators are easy to see before you climb.

1. Louisville Ladder FE3224 Fiberglass Extension Ladder

Louisville Ladder FE3224 Fiberglass Extension Ladder

Louisville Ladder FE3224 Fiberglass Extension Ladder

Check price on Amazon

Tier: Premium

The FE3224 is the classic two-story house ladder: 24 feet of fiberglass with a Type IA rating and a published maximum working length of 21 feet. Louisville builds it with the MaxLock rung lock, a custom polymer lock engineered for its extension ladder line, and a QuickLatch system that holds the fly and base sections together while you raise or lower the fly. Steel swivel safety shoes with a metal shield pivot to sit flat on hard surfaces or bite into softer ground, which helps on lawns and gravel driveways where gutter work often happens.

Fiberglass rails keep the ladder non-conductive for work near the service entrance, and the D-shaped rungs give a flat standing surface that is easier on boots during long gutter cleaning sessions. At roughly 52 pounds it is a two-hand carry for most people, and raising it alone takes practice, but that weight is normal for a fiberglass ladder of this size and rating. For homeowners who want one ladder that covers gutters, second-story windows, siding, and roof edge work, this is the most complete pick here.

Specs

  • Model: FE3224
  • Ladder size: 24 ft
  • Maximum working length: 21 ft
  • Material: Fiberglass rails
  • Duty rating: Type IA, 300 lb load capacity
  • Rung lock: MaxLock rung lock with QuickLatch system
  • Feet: Steel swivel safety shoes
  • Storage dimensions: 19 in wide x 148 in high
  • Weight: 52 lb
  • UPC: 728865200051

2. Werner D6224-2 Fiberglass Extension Ladder

Werner D6224-2 Fiberglass Extension Ladder

Werner D6224-2 Fiberglass Extension Ladder

Check price on Amazon

Tier: Mid-range

The D6224-2 is Werner’s long-running 24 foot fiberglass entry in the Type IA class, rated at 300 pounds with a published maximum reach of 23 feet and a highest standing level of 17 feet 2 inches. Its fiberglass rails are non-conductive, and the rungs are aluminum with a Traction-Tred profile. The rungs connect to the rails through Werner’s Alflo rung joint, which is designed to keep the rung-to-rail connection twist-proof over years of use.

External guides at the top of the base section interlock the rails so the fly section slides smoothly, and the gravity spring locks engage on the rungs as you raise it. The Shu-Lok shoe pairs a slip-resistant pad for hard surfaces with a spur plate for soft ground. A practical detail many owners use: the base and fly sections separate easily, so either section can serve as a shorter single ladder for one-story tasks. At 49.7 pounds it is a little lighter than the Louisville, and parts and accessories for this series are widely stocked.

Specs

  • Model: D6224-2
  • Ladder size: 24 ft
  • Maximum reach: 23 ft
  • Highest standing level: 17 ft 2 in
  • Material: Fiberglass rails, aluminum rungs
  • Duty rating: Type IA, 300 lb load capacity
  • Rungs: Traction-Tred D-rungs with Alflo rung joint
  • Feet: Shu-Lok shoe with slip-resistant pad and spur plate
  • Collapsed dimensions: 19.5 in wide x 149 in high
  • Weight: 49.7 lb
  • UPC: 051751019117

3. Little Giant Velocity M22 Multi-Position Ladder

Tier: Premium

The Velocity M22 replaces several ladders with one aluminum frame. Little Giant rates it for 33 unique configurations, including an A-frame stepladder, an extension ladder with a 22 foot reach, a staircase setup for uneven steps, a 90-degree position for working close to a wall, and a trestle-and-plank scaffold base when paired with trestle brackets. In extension mode it does the roof and gutter work this guide is about; indoors, the A-frame modes handle painting and ceiling work without a second ladder.

The frame is aluminum and carries a Type 1A rating of 300 pounds, and in the twin A-frame setup it is rated on both sides, so two people can work from it at once within the rating. Built-in wheels let you tip the folded ladder and roll it instead of carrying all 38.5 pounds. It folds to 27 inches wide by 67 inches high, which fits along a garage wall or in a tall closet. For a household that owns no ladder yet and wants one purchase to cover nearly everything, this is the most versatile option on the list.

Specs

  • Model: 15422-001 (Velocity M22)
  • Type: Multi-position ladder with wheels
  • Material: Aluminum
  • Duty rating: Type 1A, 300 lb load capacity
  • Extension reach: 22 ft
  • Configurations: 33, including A-frame, extension, staircase, 90-degree, and scaffold base
  • Storage dimensions: 27 in wide x 67 in high
  • Weight: 38.5 lb
  • UPC: 096764164225

4. Werner MT-22 Telescoping Multi-Ladder

Werner MT-22 Telescoping Multi-Ladder

Werner MT-22 Telescoping Multi-Ladder

Check price on Amazon

Tier: Budget

The MT-22 is Werner’s multi-position design built around telescoping outer sections. It works as a twin stepladder, an extension ladder, a stairway ladder, and two scaffold bases. In extension mode it adjusts from 11 to 19 feet, and as a stepladder it adjusts from 5 to 9 feet, with spring-loaded J-locks that set the height in one-foot steps. Soft-touch push knobs control the main hinges, and the steps are double-riveted for strength.

The duty rating is Type IA at 300 pounds, and in twin stepladder mode that rating applies per side. An extra-wide flared bottom adds stability in the A-frame positions, and the feet are non-marring, which matters on finished floors. Folded, it measures 20 inches wide by 69 inches high and weighs 42 pounds, so it stores in a similar footprint to the Little Giant while covering the same four jobs. If you like the multi-position idea and want the Werner name at the lower end of the ladder budget, this is the one to look at first.

Specs

  • Model: MT-22
  • Type: Telescoping multi-position ladder
  • Material: Aluminum
  • Duty rating: Type IA, 300 lb load capacity
  • Extension height range: 11 to 19 ft
  • Stepladder height range: 5 to 9 ft
  • Configurations: Twin stepladder, extension, stairway, and scaffold bases
  • Adjustment: Spring-loaded J-locks in 1 ft steps
  • Folded dimensions: 20 in wide x 69 in high
  • Weight: 42 lb
  • UPC: 051751065107

5. Xtend & Climb 785P Telescoping Ladder

Tier: Mid-range

The 785P solves a different problem: storage and transport. It extends to 15.5 feet, enough for a published reach height of 19.5 feet, then retracts rung by rung down to 36 inches tall. That short package fits in a car trunk, a closet, or an RV storage bay, places a conventional 16 foot ladder cannot go. The aluminum alloy construction uses an anodized finish that does not leave black residue on your hands, and the closure system is designed to retract without pinching fingers.

It carries a Type I rating of 250 pounds, one class below the Type IA models above, so add up your weight plus tools before choosing it for heavy work. Each section locks independently, and the ladder can be opened to partial heights for lower jobs instead of always running to full length. At 36 pounds it is the lightest ladder here. For apartment dwellers, inspectors, and anyone whose ladder has to live indoors, the 785P is the practical pick, as long as 15.5 feet of ladder covers the heights you need.

Specs

  • Model: 785P
  • Type: Telescoping straight ladder
  • Material: Aluminum alloy with anodized finish
  • Extended length: 15.5 ft
  • Reach height: 19.5 ft
  • Duty rating: Type I, 250 lb load capacity
  • Retracted height: 36 in
  • Width: 19.75 in
  • Depth: 4.5 in
  • Weight: 36 lb
  • UPC: 898140000857

Frequently Asked Questions

What size extension ladder do I need for a two-story house?

Most two-story homes are covered by a 24 or 28 foot ladder. A 24 foot model has a working length of about 21 feet and a published reach near 23 feet, which suits gutter lines around 18 to 20 feet high. Measure your gutter height, then choose a ladder whose published reach clears it, and remember the ladder should extend three feet past the roof edge if you will step onto the roof.

Is fiberglass or aluminum better for an extension ladder?

Fiberglass is the safer choice anywhere near electrical lines because the rails do not conduct electricity, and it is the standard for professional two-section ladders. Aluminum is lighter and costs less effort to move, which is why folding and telescoping designs use it, but it must be kept away from wiring. Pick based on where you will work, not on weight alone.

What does a Type IA duty rating mean?

Type IA is an ANSI duty class rated for a 300 pound total load, counting the climber, clothing, tools, and materials. Type I is rated 250 pounds, Type II is 225 pounds, and Type III is 200 pounds. A higher class also means stronger rails and less flex at full extension, which is why Type IA is the common recommendation for roof and gutter work.

How far should an extension ladder extend past the roof edge?

The top of the ladder should extend at least three feet above the roof edge or landing surface. That extra length gives you a secure handhold while you step on and off, and it keeps your hands off the gutter itself. Set the base one foot out from the wall for every four feet of height to hold the correct climbing angle.

Conclusion

For most homes, the Louisville FE3224 is the extension ladder to buy: Type IA fiberglass construction, a 21 foot working length, and swivel shoes that suit driveway and lawn work. The Werner D6224-2 covers the same jobs with a slightly lighter frame and the widest parts support. If one ladder has to do everything, the Little Giant Velocity M22 and Werner MT-22 fold between extension, step, and stairway work, with the Velocity adding wheels and a two-sided rating. And if storage decides the purchase, the Xtend & Climb 785P packs 15.5 feet of ladder into a 36 inch package. Whichever you choose, match the duty rating to your loaded weight and confirm the published reach against your gutter height before ordering.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Extension Ladders for Roof and Gutter Work:…Check price on Amazon