Updated Nov 20, 2026· 5 min read

Key takeaways

  • Permatex 81730 flowable silicone windshield sealer wicks into hidden leaks, cures clear and waterproof in 24 hours, and resists heat, cold and shock.

A slow drip from the top of a windshield after rain usually points to a failed spot in the seal around the glass, not the glass itself. The Permatex 81730 Flowable Silicone Windshield and Glass Sealer is built for exactly that problem. It is a solventless, flowable silicone RTV in a 1.5 fluid ounce tube, and instead of sitting on the surface like a normal bead, it is thin enough to flow into cracks and seams on its own.

Permatex describes the action as wicking: the uncured silicone flows with a consistency similar to syrup, so it seeks the leak and reaches hidden areas along glass edges and behind trim. Once cured, it forms a clear, tough, flexible seal that is waterproof and resistant to weather, vibration, shock and most shop chemicals. This guide covers the published specs, the jobs this sealer suits, the jobs it does not, and how it differs from other sealant types sold for glass work.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

The Permatex 81730 is a flowable silicone RTV sealer in a 1.5 fluid ounce tube, made for one job: finding and sealing leaks around glass. Its thin, syrup-like consistency wicks into cracks and seams that thicker sealants cannot reach, then cures within 24 hours into a clear, flexible, waterproof seal for windshields, sunroofs, windows and headlamp assemblies.

Key specs

The figures below come from the Permatex technical data sheet for part number 81730 and the Amazon listing for this item. Where neither source publishes a value, the field is marked not stated.

Specification Detail
Brand Permatex
Product name Flowable Silicone Windshield and Glass Sealer
Model / part number 81730 (65AR)
Container size 1.5 fl oz tube, carded
Chemical type Polysiloxane (flowable silicone RTV)
Form and viscosity Liquid; flow is similar to syrup
Color / appearance Clear
Specific gravity 1.05
Flash point Above 93 °C (200 °F), TCC method
Temperature range -80 °F to 450 °F (-62 °C to 232 °C)
Tack-free time 1 hour
Full cure time 24 hours
Water resistance Waterproof
Compatible materials (Amazon listing) Glass, vinyl
Suggested applications Windshields, sunroofs, windows, headlamp assemblies, marine glass, RV vents and windows
Tensile strength not stated
Hardness not stated
Applicator / nozzle type not stated

Who it’s for / who should skip it

Who it’s for

  • Vehicle owners chasing a leak that seeps past a windshield, sunroof or window seal while the glass itself is still sound and firmly seated.
  • RV owners sealing vents and windows, and boat owners with leaks around marine glass, where a clear finish matters.
  • Anyone with moisture entering a headlamp assembly through a seam, a listed application on the data sheet.
  • DIYers who want to seal a hidden leak without removing glass or trim, because the formula is designed to penetrate to the leak source on its own.

Who should skip it

  • Anyone installing or rebonding glass. This is a leak sealer, not a structural adhesive, and not the product that holds a windshield in its frame.
  • Anyone filling a wide, open gap. A sealer with the flow of syrup will run through a broad opening instead of bridging it, so a bead-forming sealant fits that job better.
  • Anyone repairing a chip or crack in the glass itself. This sealer closes leaks at seams and edges; it does not restore damaged glass.
  • Anyone sealing around pure oxygen systems or strong oxidizers such as chlorine, which the manufacturer rules out.
  • Anyone who needs a colored finish. The published appearance for this product is clear only.

How it compares with typical alternatives

Standard RTV silicone sealants are the closest relatives, but they behave very differently. A typical RTV comes out as a paste that holds its shape, so it is applied as a visible bead and works well for forming gasket-like seals and filling open joints. The Permatex 81730 is far thinner, so rather than building a bead it disappears into the joint. For a leak hiding inside a seam, that wicking action is the whole point; for a wide gap, the paste type is the better tool.

Urethane windshield adhesives sit at the opposite end of the scale. They are structural products used to bond glass into the vehicle body, and using them means cutting out the old bond and setting the glass again. That is the correct fix when glass is loose or the bond has failed across a long section, but far more work than a small seep requires. The flowable silicone leaves the existing bond untouched and treats only the leak path.

Chip and crack repair kits address a third, separate problem: damage within the glass pane itself. Their resins fill stone chips and short cracks in the glass surface. They do nothing for water passing around the edge of the glass, just as the Permatex sealer does nothing for a chip. Matching the product to the failure is the decision that matters most here.

FAQ

What is the Permatex 81730 flowable silicone sealer used for?

It seals leaks around glass. The manufacturer lists windshields, sunroofs, windows, headlamp assemblies, marine glass, and RV vents and windows as applications. The formula flows into cracks and seams, including hidden areas, and cures into a clear, waterproof, flexible seal.

How long does Permatex 81730 take to cure?

The Permatex data sheet states the sealant is tack-free in one hour and fully cured within 24 hours. Its directions call for locating the leak, cleaning and drying the surfaces with alcohol, applying the sealer into the leak source, allowing time for penetration, and wiping off excess with a clean rag.

Can Permatex 81730 fix a cracked windshield?

No. It stops water leaking through seams and edges around glass; it does not repair damage in the glass itself or bond a windshield in place. A chip or crack in the pane calls for a dedicated glass repair approach, and loose glass calls for professional rebonding.

Does the Permatex 81730 stay flexible after it cures?

Yes. The data sheet describes the cured seal as tough and flexible, resistant to weather, temperatures from -80 °F to 450 °F, vibration, shock and most shop chemicals. That flexibility suits it to vehicle glass seams, which expand, contract and shake in normal use.

Final verdict

The Permatex 81730 Flowable Silicone Windshield and Glass Sealer is a narrow tool that does its one job by design: it flows where thicker sealants cannot go and seals the hidden leaks that let water past glass. The published specs support that role: syrup-like flow, one hour tack-free time, 24 hour full cure, and a wide cured temperature range. If your problem is a seep around a windshield, sunroof, window or headlamp seam, it fits. If your glass is cracked, loose or being installed, choose a different product category.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Permatex 81730 Flowable Silicone Sealer: Leak Fix GuideCheck price on Amazon