Updated Nov 20, 2026· 5 min read

Key takeaways

  • EVIL ENERGY 6AN swivel hose end fitting guide: straight reusable aluminum end for CPE braided fuel line, 9/16-18 UNF thread, fitment, limits and FAQs.

The EVIL ENERGY 6AN Swivel Hose End Fitting is a straight, reusable hose end machined for one job: terminating 6AN CPE braided hose and connecting it to a standard 6AN male flare port. It is built from 6061-T6 aluminum alloy with a black anodized finish, uses the 9/16-18 UNF thread and 37-degree flare seat that define the 6AN size, and swivels a full 360 degrees so the hose can be aligned before the nut is tightened down.

This guide covers what the fitting is, the published specifications behind it, who it suits, and where its limits sit. The most important limit is hose type: this is a CPE hose end, made for CPE synthetic rubber braided hose, and the maker is explicit that CPE hose ends do not belong on PTFE hose or in alcohol-rich fuel systems such as E85.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

The EVIL ENERGY 6AN straight swivel hose end is a reusable 6061-T6 aluminum fitting that terminates 6AN CPE braided hose and seals on a 37-degree flare with a 9/16-18 UNF thread. It fits fuel feed and return lines, oil lines, and transmission cooler lines on street builds, as long as the fuel is gasoline or diesel rather than an ethanol blend like E85.

Key specs

Spec Detail
Brand EVIL ENERGY
Fitting type Straight (0-degree) swivel hose end, reusable
AN size 6AN
Thread 9/16-18 UNF
Sealing method 37-degree AN flare
Material 6061-T6 aluminum alloy
Finish Black anodized
Swivel 360-degree rotation before final tightening
Hose compatibility CPE braided hose (stainless steel braided or nylon braided CPE)
Working pressure 750 PSI, the published rating for the matching 6AN CPE hose assembly
Burst pressure 2,250 PSI, the published rating for the matching 6AN CPE hose assembly
Temperature range -22°F to 248°F (-30°C to 120°C), per the maker’s CPE line specifications
Fluid compatibility Gasoline, diesel, oil, and transmission fluid lines
Not compatible with E85, methanol, and E10 ethanol fuels; PTFE hose
Quantity in pack not stated
Part number not stated
Item weight not stated

Who it’s for / who should skip it

This fitting is for builders plumbing a custom fluid system with 6AN CPE braided hose: fuel feed and return lines on carbureted and EFI street cars, engine swaps, oil cooler lines, and transmission cooler lines. The reusable design suits anyone who expects to shorten, reroute, or rebuild a line later, because the end can be removed and refitted on a fresh hose section instead of being crimped permanently. The swivel body helps in tight engine bays, since the hose can be rotated into its natural path before the connection is torqued, which reduces twist and side load on the finished line.

Skip it if your system runs E85, methanol, or another alcohol-rich fuel, because CPE hose and its fittings are not rated for those fuels; a PTFE hose with PTFE-specific hose ends is the correct pairing there. Skip it if your hose is PTFE rather than CPE, since the maker warns against mixing CPE hose ends with PTFE hose. It is also the wrong part if your port is NPT pipe thread or an OEM quick-connect rather than a 6AN male flare, and it cannot help if the rest of your system is a different AN size, because sockets, nipples, and hose must all match the same size.

How it compares with typical alternatives

Against crimped hose ends, this reusable design trades a one-time permanent crimp for serviceability: it assembles with hand tools and an AN wrench, and it can be taken apart when a line needs to change. Against push-lock fittings, which suit low-pressure rubber hose with a barb connection, this fitting is built for braided CPE hose and flare sealing at fuel-system pressures, a different and more demanding job. Against angled hose ends in the same family, the straight body is the simplest path where a port faces the hose run directly, while 45-degree and 90-degree ends exist for ports that need a turn. Against steel fittings, the 6061-T6 aluminum body is lighter and resists corrosion in fuel and oil service, though aluminum threads call for care during tightening so the flare seat is not damaged by over-torquing.

FAQ

Does this fitting work with PTFE hose?

No. It is a CPE hose end, and the manufacturer states that CPE hose ends must not be installed on PTFE hose. PTFE hose needs hose ends designed for PTFE, which grip and seal differently.

Can it be used with E85 or ethanol-blended fuel?

No. The maker’s CPE line specifications exclude E85, methanol, and E10 ethanol fuels. For alcohol-rich fuels, the maker directs builders to a PTFE fuel hose with matching PTFE hose ends instead.

What thread and port does the 6AN end connect to?

The connection is a female 6AN swivel nut with a 9/16-18 UNF thread that seals on a 37-degree flare. It fits standard 6AN male flare ports and adapters, not NPT pipe threads or factory quick-connect fittings.

Is the fitting reusable?

Yes. The design is a reusable swivel hose end: it can be removed from a hose section and assembled onto a new length of compatible CPE braided hose of the same 6AN size, which makes line changes and repairs simpler than with a crimped end.

Final verdict

The EVIL ENERGY 6AN straight swivel hose end is a straightforward, well-specified piece for its intended system: a lightweight 6061-T6 aluminum, black anodized, reusable fitting that terminates 6AN CPE braided hose and seals on the standard 37-degree flare. Within the published envelope of the matching CPE hose assembly, 750 PSI working pressure and a temperature range of -22°F to 248°F, it covers the fuel, oil, and transmission cooler plumbing found on most street builds. Its boundaries are equally clear: CPE hose only, gasoline and diesel only, and no ethanol-rich fuels. If your build sits inside those lines, this fitting does exactly the job its name describes.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
EVIL ENERGY 6AN Hose End Fitting: Straight Swivel…Check price on Amazon