Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best parts washers for garage and shop use, from benchtop 3.5 gallon cabinets to 20 gallon floor tanks, with specs, pump output, and tips.
⭐ Key Takeaways
Quick answer: Our top pick is JEGS 20 Gallon Parts Washer, with BIG RED T10035 Torin 3.5 Gallon Parts Washer as a strong alternative.

The best parts washers for most home garages and small shops are 20 gallon steel cabinets with an electric recirculating pump, a fusible link lid, and a flow-through brush, because that size swallows carburetors, wheel bearings, gears, and valve covers while holding enough solvent to stay useful between fluid changes. Smaller benches and occasional jobs are better served by a 3.5 to 5 gallon benchtop or bucket-top unit that stores on a shelf. Below are five current models worth shortlisting, followed by the sizing and safety points that matter before you order.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

How to Choose a Parts Washer

Tank size is the first decision. Manufacturers quote two numbers: the total tank or tub capacity and the smaller solvent capacity that the unit actually holds in service. A 20 gallon cabinet typically runs on about 12 gallons of fluid, while a 40 gallon class machine holds roughly twice that. Match the tank to the largest part you clean regularly. A tub that fits a transmission case or a pair of cylinder heads saves you from washing oversized parts in a drain pan on the floor.

Pump output is the second decision. Electric submersible pumps recirculate fluid through a flexible spigot or a flow-through brush, and output figures are quoted either in liters per minute or gallons per minute depending on the maker. Higher flow scrubs faster and flushes grit out of blind passages, but even modest pumps handle bearings and hardware well because the brush does much of the work. Look for a screened inlet or filter that keeps debris out of the pump.

Solvent compatibility shapes everything else. Nearly every unit in this class is built for water-based, non-flammable degreasers, and the manuals are blunt about keeping gasoline, diesel, and other flammable liquids out of the tank. If your work calls for petroleum solvent, confirm the pump seals and the maker guidance before filling, because the wrong fluid shortens pump life.

Safety hardware is not optional decoration. A heat-resistant lid on a fusible link closes on its own if temperatures climb past a safe limit, which is the single most valuable feature on a tank full of cleaning fluid. A covered switch, a grounded cord, and a stable stand or bench placement round out the basics.

Finally, think about upkeep. Removable shelves and small parts baskets keep hardware from vanishing into the sump, a drain or low sump point makes fluid changes cleaner, and a powder coated or corrosion resistant finish slows rust in a damp garage. Replacement pumps are widely sold for this class of machine, so a common cabinet design is easier to keep running for years.

The 5 Best Parts Washers

Red Sun 20 Gallon Parts Washer

The Red Sun 20 gallon cabinet is the most complete package in this group for a one-bay garage or a busy home shop. Its alloy steel tank holds 20 gallons with a working solvent capacity of 12 gallons, and the enclosed electric submersible pump recirculates fluid through both a flexible spigot and a flow-through brush, so you can flood a part or scrub it directly. The listing recommends water-based solvent, which suits the current generation of degreasers.

The detail that lifts it into the premium tier is the heat-resistant lid. A fusible link holds the lid open in normal use and lets it drop shut on its own if the operating temperature passes a safe limit, a passive safeguard that needs no power and no attention. Inside, a removable parts shelf and a separate parts basket keep small hardware out of the sump while larger components soak below.

At 50.7 pounds the cabinet is light enough to move onto a sturdy bench or stand without help, and the spray coated finish shrugs off splashes. A one year warranty backs the unit. For cleaning wheel bearings, gears, carburetors, and engine hardware day after day, this is the balanced pick.

Specs

  • Tank capacity: 20 gallons
  • Solvent capacity: 12 gallons
  • Power: 110V, 60 Hz, 0.23A
  • Maximum pump output: 2.7 to 3.3 liters per minute
  • Construction: alloy steel with spray coated finish
  • Item weight: 50.7 pounds
  • Lid: heat-resistant with fusible link
  • Included: removable parts shelf, parts basket, flow-through brush
  • Warranty: one year

JEGS 20 Gallon Parts Washer

JEGS 20 Gallon Parts Washer

JEGS 20 Gallon Parts Washer

Check price on Amazon

The JEGS 20 gallon washer is the heavy flow option in the mid-range tier. Its pump is rated at a maximum output of 2.64 to 3.17 gallons per minute, delivered through an electric pump with a flexible nozzle, which flushes loose grit out of passages and off gear teeth far faster than low flow cabinets. The 20 gallon tub runs on 12 gallons of solvent, the same working volume as most cabinets in this class.

Construction is heavy duty steel with a powder coated black finish, a combination that resists chips and slows corrosion in a working shop. The cabinet footprint of 31 by 22 by 13 inches for the tub keeps the unit bench friendly for its size, and at 58 pounds it stays put once placed.

JEGS keeps the design simple: a lidded steel tub, a strong pump, and room for valve covers, pistons, and small transmission components. If your cleaning sessions involve caked driveline parts and you value flow rate over extra fittings, this is the cabinet to look at first.

Specs

  • Tub capacity: 20 gallons
  • Solvent capacity: 12 gallons
  • Maximum pump output: 2.64 to 3.17 gallons per minute
  • Construction: heavy duty steel
  • Finish: powder coated black
  • Product dimensions: 31 x 22 x 13 inches
  • Item weight: 58 pounds
  • Pump: electric with flexible nozzle

BIG RED T10035 Torin 3.5 Gallon Parts Washer

BIG RED T10035 Torin 3.5 Gallon Parts Washer

BIG RED T10035 Torin 3.5 Gallon Parts Washer

Check price on Amazon

The BIG RED T10035 is the benchtop answer for small parts work. Its steel cabinet carries a 3.5 gallon fluid reservoir, and the 110V electric pump recycles liquid at half a gallon per minute, a gentle flow that suits bearings, carburetor bodies, fasteners, and bicycle or small engine parts without blasting solvent across the bench.

Torin builds the cabinet from steel with a corrosion resistant coating for better solvent retention and longer service life. At 16.8 pounds and roughly 18.5 by 14.2 by 9.8 inches, the unit lifts onto a shelf when the bench is needed for other work, which is exactly how occasional users tend to run a small washer.

The maker is explicit that highly volatile, flammable, or combustible solvents and fuels stay out of this tank, so plan on a water-based degreaser. A one year limited manufacturer warranty is included. For a first parts washer or a dedicated small parts station beside a larger cabinet, the T10035 is a tidy mid-range choice.

Specs

  • Fluid reservoir capacity: 3.5 gallons
  • Pump: 110V electric
  • Recycle rate: 0.5 gallon per minute
  • Construction: steel with corrosion resistant coating
  • Item weight: 16.8 pounds
  • Product dimensions: 18.5 x 14.17 x 9.84 inches
  • Model number: T10035
  • Warranty: one year limited

JEGS 5-Gallon Portable Parts Washer

The JEGS 5-gallon portable washer, part number 81526, squeezes cabinet style cleaning into a footprint of about 14.3 by 17.4 by 8.8 inches. The tank is rated at 5 gallons with a solvent capacity of 3.5 gallons, and the pump posts a maximum output of 3.96 gallons per minute, a strong figure for a unit this small and a help when scrubbing greasy hardware under time pressure.

Heavy duty steel construction and a powder coated finish keep the little cabinet from feeling disposable, and at 17 pounds it moves between bench, tailgate, and storage shelf without drama. A rocker switch runs the pump, and the top load layout keeps the work area open.

This is the budget friendly route for kart, mower, and motorcycle work, or for a renter who cannot give floor space to a standing cabinet. It gives up the deep soaking volume of the 20 gallon class, but for small components it covers the same cleaning method in a far smaller box.

Specs

  • Tank capacity: 5 gallons
  • Solvent capacity: 3.5 gallons
  • Maximum pump output: 3.96 gallons per minute
  • Construction: heavy duty steel
  • Finish: powder coated
  • Item weight: 17 pounds
  • Product dimensions: 14.25 x 17.38 x 8.75 inches
  • Part number: 81526
  • Controls: rocker switch

BIG RED AXH-PPW5GR Torin 5 Gallon Portable Parts Washer

BIG RED AXH-PPW5GR Torin 5 Gallon Portable Parts Washer

BIG RED AXH-PPW5GR Torin 5 Gallon Portable Parts Washer

Check price on Amazon

The AXH-PPW5GR takes a different approach to portable cleaning: instead of a cabinet, you get a molded plastic basin and pump assembly sized to sit on a standard 5 gallon bucket, which becomes the solvent reservoir. The whole unit weighs about 3.5 pounds and measures roughly 13.7 by 13.7 by 5 inches, so it hangs on a wall or rides in a service truck with ease.

A submersible pump feeds a flow-through brush, and a channel drainage layout routes fluid and small residue back into the bucket. Torin limits this model to noncorrosive, water-based solutions only, which matches the plastic construction and keeps the chemistry mild for field work.

There is no lid, no stand, and no soaking depth beyond the bucket itself, so this is not a substitute for a cabinet in a busy shop. It is, however, the lightest way to bring pumped solvent cleaning to a driveway, a pit lane, or a job site, and a one year warranty stands behind it. Budget buyers who already own buckets and need occasional degreasing will find it hard to beat for portability.

Specs

  • Capacity: designed for standard 5 gallon buckets, bucket not included
  • Basin dimensions: 13.7 x 13.7 x 5 inches
  • Item weight: about 3.5 pounds
  • Construction: plastic
  • Pump: submersible with flow-through brush
  • Cleaning solution: noncorrosive, water-based solutions only
  • Model number: AXH-PPW5GR
  • Warranty: one year

FAQ

What size parts washer does a home garage need?

A 20 gallon cabinet with about 12 gallons of working solvent covers most home garage work, including carburetors, bearings, gears, and valve covers. Benchtop 3.5 to 5 gallon units suit small hardware and occasional jobs, while high volume shops cleaning transmission cases daily are better served by the 40 gallon class.

Can you put mineral spirits or gasoline in these parts washers?

No. The models in this guide are built for water-based, non-flammable degreasers, and their makers warn against gasoline, diesel, and other flammable or combustible liquids. Always match the fluid to the pump and seal guidance in the manual for the exact model you own.

A fusible link holds the lid open during normal use and melts at a set high temperature, letting the heavy lid fall shut on its own. That smothers a fire in the tank before it spreads, which is why a fusible link lid is considered essential safety hardware on a solvent cabinet.

How often should parts washer fluid be changed?

Change the fluid when cleaning slows down, the fluid stays cloudy after settling, or sludge builds up in the sump, since worn fluid leaves grit on finished parts. Skimming debris, using the parts basket for small hardware, and keeping the pump inlet screen clear all stretch the interval between changes.

Conclusion

For most readers, the Red Sun 20 gallon cabinet is the best parts washer to buy first: full size capacity, a flow-through brush, a removable shelf and basket, and the passive protection of a fusible link lid. The JEGS 20 gallon washer answers with the strongest pump flow in this group for heavy driveline grime. Bench space misers are covered too, with the steel T10035 cabinet for small parts, the compact JEGS 5-gallon portable for occasional jobs, and the bucket-top AXH-PPW5GR when cleaning has to travel. Pick the tank that fits your largest regular part, fill it with a water-based degreaser, and the greasiest corner of the shop gets much easier to manage.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Parts Washers: Top Picks for a Cleaner…Check price on Amazon