Updated Nov 20, 2026· 10 min read

Key takeaways

  • Compare five small parts organizers for screws, fasteners and garage hardware, with drawer and bin counts, dimensions, and stacking or wall-mount options.

Loose screws, bolts, washers and wall anchors have a way of spreading across every bench, shelf and coffee can in the garage. A dedicated small parts organizer fixes that by giving each fastener size its own drawer, bin or cup. This roundup compares five organizers sold on Amazon, covering fixed drawer cabinets for a permanent bench setup and lidded cases with removable bins or cups for portable use.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

If you want one organizer for a large fastener collection, the Akro-Mils 10144 pairs 44 fixed drawers in two sizes with a footprint that fits above a bench, plus wall mounting and stacking. If drawer count matters more than drawer size, the IRIS USA 64-Drawer Cabinet squeezes 64 small drawers into a similar frame. For hardware that travels, the DEWALT DWST14825 Deep Pro Organizer and the Milwaukee PACKOUT Compact Low-Profile Organizer use removable cups and bins inside sealed, latching cases, while the Stanley 014725R spreads 25 removable cups across a flat, shelf-friendly case.

Product Compartments Overall Dimensions Layout Tier
Akro-Mils 10144 Cabinet 44 fixed drawers 20 x 6.37 x 15.81 in Fixed drawers, two sizes Mid-range
IRIS USA 64-Drawer Cabinet 64 fixed drawers 19.5 x 7 x 15.5 in Fixed drawers, one size Budget
DEWALT DWST14825 Deep Pro 10 removable cups 17.4 x 13.9 x 4.6 in Removable deep cups Premium
Milwaukee PACKOUT 48-22-8436 5 removable bins 16.38 x 9.76 x 2.52 in Removable bins Premium
Stanley 014725R 25 removable cups 16.25 x 13.5 x 2.19 in Removable cups, three sizes Budget

Table of Contents

How Compared

Each organizer in this roundup was compared on the specifications its maker and its Amazon listing publish. The main axes are compartment count and type, meaning fixed drawers versus removable bins or cups, followed by the published overall dimensions. Mounting and stacking options were weighed next: wall-mount keyholes and holes, interlocking feet and grooves, side latches and system connections all change how an organizer grows with a collection. Seal ratings, latch materials and lid designs were included where the maker publishes them. Prices and ratings were left out on purpose; the tiers below reflect feature sets and positioning only, and every figure in this guide comes from published specifications.

Akro-Mils 10144 44-Drawer Cabinet

The Akro-Mils 10144 is the classic bench cabinet in this group. Its 44 fixed drawers split into 32 small drawers across the upper rows and 12 large drawers below, so one cabinet can hold everything from tiny machine screws to bulkier hinges, brackets and anchor packs. The published inside dimensions give the large drawers room for grouped hardware, while the small drawers suit one fastener size each. Eight small dividers and four large dividers are included, molded into the back of the cabinet and ready to cut free when a drawer needs splitting. Four keyhole slots on the back panel let the cabinet hang on a wall, and the frame is shaped to stack securely with additional cabinets as a collection grows. The cabinet is made in the USA from high-impact polystyrene, with clear drawers, finger-grip pulls and rear stop tabs.

Specs

  • Model: 10144
  • Compartments: 44 fixed drawers, 32 small and 12 large
  • Overall dimensions: 20 in W x 6.37 in D x 15.81 in H
  • Large drawer inside dimensions: 4-7/8 x 4-1/4 x 2 in
  • Small drawer inside dimensions: 5-1/4 x 1-11/16 x 1-1/2 in
  • Material: high-impact polystyrene frame with clear drawers
  • Included dividers: 8 small and 4 large, molded into the cabinet back
  • Mounting and stacking: four keyhole slots for wall mounting; cabinets stack securely
  • Extras: finger-grip drawer pulls, rear stop tabs
  • Tier: mid-range

IRIS USA 64-Drawer Cabinet

The IRIS USA 64-Drawer Cabinet takes the opposite approach to the Akro-Mils: more compartments, all in one small size. Sixty-four fixed drawers in a frame under twenty inches wide give every screw diameter, nut, washer and connector its own home, which suits anyone who sorts hardware by exact size and thread. The published inner drawer dimensions run six inches deep, so long screws and bolts lie flat without bending across a divider. Grooves on the lid and interlocking feet let several cabinets stack into a tower, and four mounting holes in the back panel allow the cabinet to hang on a wall instead. Because every drawer is the same size, planning is simple: fill the drawers in order and label the fronts. Bulky hardware such as gate hinges will not fit, so this cabinet works best as a dedicated fastener library beside a separate bin for oversize pieces. It is made in the USA.

Specs

  • Compartments: 64 fixed drawers, one size
  • Overall dimensions: 19.5 in W x 7 in D x 15.5 in H
  • Drawer inside dimensions: 6 x 1.75 x 1.5 in
  • Material: plastic frame and drawers
  • Mounting and stacking: interlocking grooves and feet for stacking; four mounting holes for wall hanging
  • Country of origin: made in the USA
  • UPC: 762016480053
  • Tier: budget

DEWALT DWST14825 Deep Pro Organizer

The DEWALT DWST14825 Deep Pro Organizer is built for hardware that moves between the garage, the truck and the job at hand. Ten removable cups sit inside a deep case, and each cup lifts out so a single fastener type can ride along while the rest stay behind. The cups are deep enough for fittings, connectors and grouped hardware that would overflow a shallow drawer. DEWALT publishes an IP53 seal for the case, which helps keep dust and splashes away from the contents, and the clear lid shows every cup without opening the case. Metal front latches close the lid firmly, and side latches let several Deep Pro organizers lock together into one carried stack. An integrated handle sits on top for one-hand carries. With ten compartments, this case favors grouped hardware over one-compartment-per-size sorting.

Specs

  • Model: DWST14825
  • Compartments: 10 removable deep cups
  • Overall dimensions: 17.4 x 13.9 x 4.6 in
  • Seal: IP53 water and dust seal as published by the maker
  • Latches: metal front latches; side latches connect multiple organizers for stacking and carrying
  • Lid: clear, impact resistant
  • Handle: integrated top carry handle
  • UPC: 076174711899
  • Tier: premium

Milwaukee PACKOUT Compact Low-Profile Organizer 48-22-8436

Milwaukee PACKOUT Compact Low-Profile Organizer 48-22-8436

Milwaukee PACKOUT Compact Low-Profile Organizer 48-22-8436

Check price on Amazon

The Milwaukee 48-22-8436 is the slimmest case in this roundup, standing only about two and a half inches tall. Inside, five removable bins hold grouped fasteners, and the bins can be mounted on common jobsite materials for quick access during a task. Milwaukee publishes an IP65 rated weather seal for this organizer, the highest seal figure in the group, along with no-travel bin seals that keep small parts from migrating between bins while the case is carried. The clear top makes the contents easy to scan. As part of the PACKOUT modular storage system, the case connects to other PACKOUT boxes, so it can ride on top of a larger stack rather than compete for shelf space. The low profile limits bin depth, so this organizer suits screws, anchors, terminals and fittings rather than bulky hardware. The published weight is light enough for daily carrying.

Specs

  • Model: 48-22-8436
  • Compartments: 5 removable bins
  • Overall dimensions: 16.38 x 9.76 x 2.52 in
  • Weight: 2.43 lb
  • Seal: IP65 rated weather seal as published by the maker; no-travel bin seals
  • Lid: clear top
  • Mounting and stacking: connects to PACKOUT modular storage components; bins are removable and mountable
  • Material: impact-resistant polymer
  • UPC: 045242524211
  • Tier: premium

Stanley 014725R 25-Compartment Organizer

The Stanley 014725R takes the flat case idea and multiplies the compartments. Twenty-five removable cups in three sizes sit under a clear lid, giving small screws, pins, clips and terminals individual spots while larger cups hold grouped hardware. The lid is designed to interlock with the cups, which limits how far small parts can shift when the case is carried by its wide handle. At a little over two inches tall, the closed case slides onto a shelf or into a drawer bank where taller organizers will not fit, and the flat shape also stacks neatly with a second case on top. There is no published seal rating, so this organizer is aimed at indoor benches and garages rather than wet or dusty transport. For a collection that is wide but shallow, meaning many sizes in modest quantities, the cup count and low profile make this a practical budget pick.

Specs

  • Model: 014725R
  • Compartments: 25 removable cups in three sizes
  • Overall dimensions: 16.25 x 13.5 x 2.19 in
  • Lid: clear lid interlocks with the cups to limit part migration
  • Handle: wide carry handle
  • Profile: low, flat case for shelf storage and stacking
  • Tier: budget

Fixed Drawers vs Removable Bins and Cups

The biggest decision in this roundup is layout. Fixed drawer cabinets, like the Akro-Mils 10144 and the IRIS USA 64-Drawer, keep every compartment in one frame. Nothing leaves the bench, labels stay in order, and a wall-mounted cabinet turns vertical space into storage. The cost is portability: the whole cabinet travels, or nothing does. Cases with removable bins and cups, like the DEWALT, Milwaukee and Stanley entries, let you pull one compartment and carry it to the work. That flexibility matters for repairs around the house and for hardware that lives in a vehicle. The cost is capacity per case and the discipline of returning cups to their spots. Many garages end up with both styles: a fixed cabinet as the library, and one lidded case as the satellite that moves. Match the layout to where the hardware is used, rather than where it is stored.

How to Choose

Begin with a rough count of the fastener types you own. A collection with dozens of sizes points toward the 44 or 64 drawer cabinets, while grouped hardware fits the ten-cup DEWALT or the five-bin Milwaukee. Measure the space next. Cabinets need about sixteen inches of height and six to seven inches of depth, plus wall studs or a sturdy shelf if you plan to hang or stack them. Flat cases need shelf depth of about fourteen inches and very little height. Movement matters too: hardware that stays in the garage suits fixed drawers, while hardware that rides in a truck argues for a sealed case. Finally, check the seal figures and lid designs if dust or moisture is a concern, and confirm that divider or bin layouts match the sizes you actually store, from tiny set screws to long lag bolts.

Care and Maintenance

Plastic organizers ask for little upkeep. Empty one drawer, bin or cup at a time and wipe it with a damp cloth, then dry it fully before refilling so stored steel hardware stays dry. Mild soap handles greasy residue from oily fasteners; harsh solvents can cloud clear lids and drawers, so keep them away from the transparent parts. Check latch hinges and lid seals a few times a year, and clear grit from seal channels so the published protection stays effective. For wall-mounted cabinets, confirm the mounting screws still bite firmly, especially after adding a stacked unit above. Refresh labels whenever a compartment changes contents, since an accurate label turns storage into a system you can trust at a glance.

Frequently Asked Questions

How many drawers do I need for a home fastener collection?

Match the count to the number of sizes you keep. A modest collection of common screws, nails and anchors fits a 25-cup case or a 44-drawer cabinet, while a collection sorted by diameter, length and thread usually grows into a 64-drawer cabinet.

Are removable bins better than fixed drawers for garage hardware?

Neither layout wins outright. Removable bins and cups suit hardware that travels to the work, because one compartment can be carried on its own. Fixed drawers suit a bench library, because every compartment stays in a labeled order and the cabinet can hang on a wall.

Can these organizers be wall mounted or stacked?

The two cabinets can. The Akro-Mils 10144 uses four keyhole slots and stacks with matching cabinets, and the IRIS USA cabinet stacks on interlocking grooves and hangs from four mounting holes. The lidded cases stack in their own ways, through side latches on the DEWALT and the PACKOUT connection on the Milwaukee.

What do IP53 and IP65 seals mean for a parts organizer?

Both figures describe published protection against dust and water. The DEWALT case carries an IP53 figure, aimed at dust and splashes, while the Milwaukee organizer carries an IP65 figure, the higher of the two, aimed at dust-tight construction and stronger water resistance for transport in poor weather.

Conclusion

Each organizer here serves a different garage. Choose the Akro-Mils 10144 for a mixed bench library with two drawer sizes, the IRIS USA 64-Drawer Cabinet for maximum drawer count on a budget, the DEWALT DWST14825 for deep removable cups in a sealed case, the Milwaukee 48-22-8436 for a slim IP65 case that joins a PACKOUT stack, and the Stanley 014725R for a flat case full of small cups. Measure your space, count your fastener types, and the right layout will be clear.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Small Parts Organizers for Screws and HardwareCheck price on Amazon