Key takeaways
- Compare the best router lifts for router tables, with plate sizes, motor fit, lift mechanisms and insert rings compared to help you choose the right lift.
- Top Pick: Kreg Precision Router Lift PRS5000 — Mid-Range
- Runner-up: Conclusion
- Also consider: Conclusion
A router lift clamps your router motor into a plate that sits flush in the router table, then raises and lowers the motor from above the table with a crank, so bit height changes and bit swaps happen without reaching underneath. If you want one lift that fits the widest range of motors, the Kreg Precision Router Lift PRS5000 accepts more than 20 popular router models with no adapters and drops into the common 9-1/4 x 11-3/4 inch plate opening. If you run a heavy 4.2-inch motor such as the Porter-Cable 7518, the JessEm Mast-R-Lift II and the two Incra Mast-R-Lift II models add cam or screw locking and sealed bearing carriages built for that weight. On a tighter budget, the JessEm Rout-R-Lift II covers 3.5-inch motors with the same above-table convenience for less money, as long as you pick the version that matches your motor diameter.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Kreg Precision Router Lift PRS5000
- JessEm Mast-R-Lift II 02120
- Incra Mast-R-Lift-II
- Incra Mast-R-Lift-II-R for Rockler Tables
- JessEm Rout-R-Lift II 02310
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
1. Kreg Precision Router Lift PRS5000 — Mid-Range
The Kreg PRS5000 is the lift to shortlist first if you are not sure which motor you will run in the table long term. Kreg publishes a fit list of more than 20 popular router models, covering 3.5-inch motors such as the Bosch 1617 and 1618, DeWalt 610, 616 and 618, and Porter-Cable 690 and 890 series, plus 4.2-inch motors such as the Porter-Cable 7518 and Milwaukee 5626, all without pads or adapters. The carriage clamps the motor directly, and the whole unit replaces the insert plate in any table cut for the standard plate size, including every Kreg router table and many competing brands.
Height control is the reason this lift earns its name. One full turn of the included crank moves the carriage exactly 1/16 inch, and the built-in micro-adjust scale can be zeroed at any point so you can return to a recorded setting for repeat cuts. The carriage rides on bearings for smooth travel, anti-backlash compensation keeps the setting from drifting when you reverse direction, and the collet rises far enough above the table for bit changes from above with a pair of wrenches. Three insert rings are included, sized 1 inch, 1-1/8 inch for a rub collar, and 2-5/8 inch. Kreg backs the lift with a 3-year limited warranty. Two fit notes from the maker are worth heeding: the DeWalt 625 and the cordless DCW600 do not fit, and plate leveling hardware is sold separately rather than built into the underside of the plate.
Specs
- Plate size: 9-1/4 x 11-3/4 inches, 3/8 inch thick
- Plate material: Hard-anodized aluminum
- Motor compatibility: More than 20 router models, 3.5-inch and 4.2-inch motor bodies, no adapters needed
- Lift mechanism: Bearing-guided carriage, crank drive, 1/16 inch of travel per crank turn
- Fine adjustment: Micro-adjust scale, zeroable at any height
- Included: Crank, 3 insert rings (1 inch, 1-1/8 inch, 2-5/8 inch)
- Warranty: 3-year limited warranty
2. JessEm Mast-R-Lift II 02120 — Premium
The Mast-R-Lift II is JessEm’s flagship lift, machined in Canada and built around a solid aluminum plate with a hard anodized finish. Where the Kreg relies on a fit list, the JessEm uses adjustable clamping blocks, so one carriage accepts both common motor families: 3.5-inch motors such as the Bosch 1617 and 1618, DeWalt 616 and 618, and Porter-Cable 690 and 890 series, and 4.2-inch motors such as the Porter-Cable 7518 and 7519 and the Triton fixed-base models, with no adapter collars to buy. That makes it a strong pick for a shop that may upgrade from a mid-size router to a 3-1/4 hp motor later.
The lifting screw runs on double-sealed bearings, five in total, and the shafts are pressed into their mounts with hydraulic pressure and fastened with multiple screws instead of threading straight into the top plate, which keeps the carriage rigid under a heavy motor. JessEm publishes 3-1/2 inches of travel, enough to raise tall panel-raising bits fully above the table. An exclusive cam locking system locks the carriage once the height is set, so vibration cannot walk the bit down mid-cut, and added tension on the spindle reduces backlash. Three insert rings, a crank and a wrench are in the box. The trade-offs are weight and effort: this is a heavy unit, so a thin benchtop may need stiffening underneath, the crank takes more effort to turn than some rivals, and like most lifts here it suits fixed-base motors rather than plunge routers.
Specs
- Plate size: 9-1/4 x 11-3/4 inches, 3/8 inch thick
- Plate material: Machined aluminum, hard anodized finish
- Motor compatibility: Adjustable clamping blocks fit 3.5-inch and 4.2-inch fixed-base motors, including Porter-Cable 7518, Bosch 1617 and DeWalt 618
- Lift mechanism: Threaded lift screw on 5 double-sealed bearings, hydraulically pressed shaft mounts
- Travel: 3-1/2 inches
- Locking: Cam locking system holds the set height
- Included: Crank, wrench, 3 insert rings
3. Incra Mast-R-Lift-II — Premium
Incra builds its version of the Mast-R-Lift II around one feature nobody else here matches: the MagnaLOCK reducing ring system. Instead of rings that thread or twist into the plate, five steel reducing rings snap into the plate opening with magnets, so swapping from a small edge-forming bit to a wide panel raiser takes seconds and needs no tool. The ring set spans from a small bit opening to a wide opening for large cutters, and the rings sit dead flush because the magnets pull them down against a machined seat.
Under the plate, a direct-drive 16 TPI lift screw gives a fine, responsive feel at the crank, and the carriage runs on five sealed ball bearings for smooth movement across the full travel range. The aluminum plate uses the common 9-1/4 x 11-3/4 inch footprint, sized for Incra router tables and any other table cut to that opening. Incra publishes a broad motor fit list covering the Bosch 1617EVS and 1618, DeWalt 610 and 618, Milwaukee 5615 through 5626, Porter-Cable 690, 890 and 7518, Makita 1101 and more. The box holds the lift, a crank handle and the ring set, and Incra lists a 1-year warranty. The main caution is table fit: the plate suits Incra and standard-opening tables, so owners of Rockler tables should look at the R version below instead of forcing this one into a smaller opening.
Specs
- Plate size: 9-1/4 x 11-3/4 inches, 3/8 inch thick
- Plate material: Aluminum
- Motor compatibility: Wide fit list including Bosch 1617EVS, DeWalt 618, Milwaukee 5626 and Porter-Cable 7518
- Lift mechanism: Direct-drive 16 TPI lift screw, 5 sealed ball bearings
- Insert rings: MagnaLOCK magnetic system, 5 steel reducing rings included
- Included: Lift, crank handle, ring set
- Item weight: 11 pounds
- Warranty: 1 year
4. Incra Mast-R-Lift-II-R for Rockler Tables — Premium
The Mast-R-Lift-II-R is the same Incra lift concept cut down for the smaller plate opening used by Rockler and Bench Dog router tables. Its plate measures 8-1/4 x 11-3/4 inches, so it drops into those tables without recutting the top, a real saving if your table is a cast-iron extension wing or a Rockler top you do not want to modify. Everything that defines the standard model carries over: the MagnaLOCK magnetic reducing rings with five steel rings in the box, the direct-drive 16 TPI lift screw, and the ball-bearing carriage with five sealed bearings for smooth, repeatable movement.
Motor fit mirrors the bigger model, covering the common 3.5-inch motors from Bosch, DeWalt, Milwaukee and Porter-Cable plus the 4.2-inch Porter-Cable 7518, so Rockler table owners give up nothing on compatibility. Height changes happen from above the table with the included crank, and the fine screw pitch makes small corrections easy to dial in. The limitations are the flip side of its purpose: it only fits the 8-1/4 inch opening, so it is the wrong buy for a standard 9-1/4 inch table, and the height gauge markings cannot be zeroed, which means repeat setups rely on counting turns or measuring from a known point rather than returning to a zeroed dial. For a Rockler or Bench Dog table owner, though, it is the only lift in this roundup that fits out of the box.
Specs
- Plate size: 8-1/4 x 11-3/4 inches, 3/8 inch thick
- Plate material: Anodized aluminum
- Table fit: Rockler and Bench Dog router tables
- Motor compatibility: Bosch, DeWalt, Milwaukee and Porter-Cable motors including the 7518
- Lift mechanism: Direct-drive 16 TPI lift screw, 5 sealed ball bearings
- Insert rings: MagnaLOCK magnetic system, 5 steel reducing rings included
- Included: Lift, crank handle, ring set
5. JessEm Rout-R-Lift II 02310 — Budget
The Rout-R-Lift II is JessEm’s value route into above-table adjustment, and the 02310 version is built for the most common motor size in home shops: 3.5-inch diameter motors. JessEm publishes fit for the Porter-Cable 690 and 890 series, DeWalt 610, 616 and 618, Bosch 1617 and 1618, and any other fixed-base router with a 3.5-inch motor body. The lift mechanism itself is aluminum, while the top plate is phenolic, a combination that keeps the cost down while staying flat and slick under workpieces.
Despite the lower tier, the engineering details mirror the Mast-R-Lift II: the spindle runs on a double-sealed ball bearing so the carriage raises and lowers smoothly, and the shafts are pressed into their mounts with hydraulic pressure and fastened with more than one screw, spreading lateral load for a rigid, durable mount. All machined parts are CNC machined. Bits change from above the table with straight wrenches, no bent wrenches needed, which is the main daily convenience a lift buys you. JessEm sells the Rout-R-Lift II in five versions matched to different motors and diameters, so ordering the correct one matters: this 02310 is only for 3.5-inch motors, and owners of a 4.2-inch motor such as the Porter-Cable 7518 need the Mast-R-Lift II instead. A 1-year manufacturer warranty is included.
Specs
- Plate size: 9-1/4 x 11-3/4 inches
- Top plate material: Phenolic, with aluminum lift mechanism
- Motor compatibility: 3.5-inch diameter motors only, including Porter-Cable 690 and 890, DeWalt 610, 616 and 618, Bosch 1617 and 1618
- Lift mechanism: Crank drive, double-sealed ball bearing on the spindle, hydraulically pressed shaft mounts
- Bit changes: From above the table, no bent wrenches required
- Model number: 02310
- Warranty: 1-year manufacturer warranty
Frequently Asked Questions
What plate size do most router tables use?
Most router tables and replacement tops are cut for a 9-1/4 x 11-3/4 inch plate, and four of the five lifts here match that opening. Rockler and Bench Dog tables use a smaller 8-1/4 x 11-3/4 inch opening, which is why Incra sells the Mast-R-Lift-II-R in that size. Measure your table opening before ordering, because a plate that is too large will not drop in and a plate that is too small leaves a gap no leveling screw can hide.
Can one router lift fit both 3.5-inch and 4.2-inch motors?
Some can. The Kreg PRS5000, JessEm Mast-R-Lift II and both Incra models accept motors from both size families, covering mid-size routers such as the Bosch 1617 and heavy 3-1/4 hp motors such as the Porter-Cable 7518. The JessEm Rout-R-Lift II 02310 is limited to 3.5-inch motors. Check the maker fit list against your exact model either way, since a few routers, such as the DeWalt 625, are excluded even from wide-fit lifts.
Why change bits from above the table?
Raising the collet above the table surface lets you loosen and swap bits with straight wrenches while standing at the table, instead of reaching under the top or pulling the router out of the plate. Every lift in this roundup raises the motor high enough for above-table bit changes, and the same crank gives you fine height control for dialing in a cut, which is the main accuracy gain over a fixed base mounted under a plain insert plate.
Do router lifts work with plunge-base routers?
Generally, no. These lifts clamp the bare motor or a fixed-base motor housing in the carriage, and plunge bases do not fit that clamping arrangement. JessEm states the Mast-R-Lift II cannot be used with a plunge router, and the other lifts here follow the same fixed-base pattern. If your only router is a plunge model, plan on dedicating a fixed-base motor to the table or choosing a router with a removable motor that the lift maker lists as compatible.
Conclusion
For most shops, the Kreg Precision Router Lift PRS5000 is the safest buy: it fits more than 20 router models with no adapters, its crank moves the bit a predictable 1/16 inch per turn, and the zeroable micro-adjust scale makes repeat setups simple. If you run or plan to run a heavy 4.2-inch motor and want the most rigid carriage, the JessEm Mast-R-Lift II adds a cam lock, five double-sealed bearings and 3-1/2 inches of travel. Incra’s Mast-R-Lift-II earns its place for the MagnaLOCK rings, which make ring swaps nearly instant, and the R version is the clear choice for Rockler and Bench Dog tables with the smaller opening. The JessEm Rout-R-Lift II 02310 rounds out the list as the budget pick for the very common 3.5-inch motors. Whichever lift you choose, confirm two numbers first: your table opening and your motor diameter. Get those right and any of these five will make bit changes faster and height settings far more repeatable.
Related articles
- Best Featherboards for Table Saws and Router Tables
- Best Push Sticks and Push Blocks for Table Saw Safety
- Best Toggle Clamps for Jigs, Fixtures and Welding Tables
- Best Drywall Lifts: 5 Panel Hoists for Ceilings and Walls
- Best Sanding Discs: 5-Inch Hook and Loop Picks for 2026
- Best Tool Boxes: Portable Picks for Hand Tool Kits




