Key takeaways
- A single-channel 0-20V/0-5A bench supply fits most hobbyist and repair use, a 0-20V dual-tracking supply suits anyone building symmetric op-amp or audio…
A single-channel 0-20V/0-5A bench supply fits most hobbyist and repair use, a 0-20V dual-tracking supply suits anyone building symmetric op-amp or audio circuits, and a higher-current 0-20V unit is the right call for testing motors, LED arrays, or higher-draw prototypes. A 0-20V power supply is a common bench voltage range because it comfortably covers the vast majority of low-voltage digital and analog circuits without the extra cost of a wider 0-30V or 0-60V range most hobbyists never fully use.
“0-20V” describes the adjustable output range of a bench power supply, letting the user dial in any voltage from zero up to 20 volts rather than being locked to a single fixed output. This range covers common logic voltages (3.3V, 5V, 12V), most op-amp and small-motor circuits, and a wide swath of general electronics repair and prototyping work, which is why it remains one of the most popular bench supply ranges even as higher-voltage units have become more common and affordable.
At a Glance
| Category | Best for | Typical stated specs | Limits |
|---|---|---|---|
| Single-channel 0-20V/0-5A | General hobby electronics, phone/board repair | Digital display; CV/CC mode; 0-20V, 0-5A | One output only; no symmetric +/- rail |
| Single-channel 0-20V/0-10A | Higher-draw projects, small motors, LED arrays | Same voltage range with higher current headroom | Larger, heavier unit; may need more active cooling |
| Dual-tracking 0-20V supply | Audio and op-amp circuits needing symmetric +/- rails | Two outputs that track together for balanced +/-V | Higher cost than single-channel units |
| Triple-output bench supply (0-20V + fixed rails) | Mixed digital/analog prototyping on one bench | One or two 0-20V adjustable channels plus a fixed 5V/3.3V rail | Bigger footprint; higher price than single-channel units |
| Programmable 0-20V supply (for comparison) | Repeatable test sequences, QA, education labs | USB/serial control, memory presets | Added cost for software features most hobbyists don’t need |
Single-Channel 0-20V/0-5A Supplies
This is the sweet spot for most buyers: enough voltage range to cover almost any small electronics project, enough current for typical microcontroller, sensor, and small-circuit work, and a manageable size and price. Reviewers of budget units in this range, from brands such as Korad and Tekpower, note that the better models add a clear CV/CC indicator so you always know whether the supply is holding steady voltage or has dropped into current limiting, which matters when debugging why a circuit isn’t behaving as expected.
Single-Channel 0-20V/0-10A Supplies
Stepping up to a higher current rating in the same 0-20V range suits projects that draw more current: small DC motors, strings of high-power LEDs, or charging small battery packs. The extra current headroom means a bulkier unit with a more capable cooling fan, so buyers who don’t actually need the extra amps are usually better served by the lighter, quieter 5A-class unit.
Dual-Tracking 0-20V Supplies
Anyone building or testing op-amp circuits, audio amplifiers, or other analog designs that need a symmetric positive and negative rail (for example, +12V and -12V simultaneously) should look at a dual-tracking supply. These units adjust both outputs together so the positive and negative rails stay matched as you turn a single knob, which single independent-channel supplies can’t do as conveniently. This feature is specifically useful for analog and audio work and largely unnecessary for digital-only projects.
Triple-Output Bench Supplies
A triple-output unit typically pairs one or two adjustable 0-20V (or similar range) channels with a fixed-voltage rail, often 5V or 3.3V, aimed at anyone who regularly moves between digital logic testing and adjustable analog work on the same bench. This is a convenience feature for a mixed workload rather than a necessity, and it adds both size and cost over a simple single-channel unit.
Build Quality Signals Worth Checking
Beyond the headline voltage and current numbers, a few build details separate a supply that holds up on a busy bench from one that becomes a frustration after a few months of use. Binding posts that stay tight after repeated plugging and unplugging matter more than they sound, since loose posts can introduce intermittent contact that looks like a circuit fault but is really a hardware issue. A case with a solid base and non-slip feet keeps the unit from sliding around when cables are tugged, which is a common annoyance on lighter, lower-cost units. Reviewers who put entry-level bench supplies through extended use often flag the rotary encoder or voltage knob as the first part to develop play or inconsistent response, so a supply with a knob that still feels precise after moderate use is a reasonable sign of better overall build quality.
What to Look For
- Actual current need – most small electronics projects need well under 5A; buying extra current headroom mainly adds size, weight, and cost.
- CV/CC indication – a clear on-display indicator for constant-voltage versus constant-current mode makes troubleshooting much easier.
- Display resolution – finer voltage and current step sizes make it easier to dial in an exact test condition.
- Dual-tracking capability, if needed – only relevant for symmetric analog/audio circuit work; skip it for purely digital projects.
- Protection features – over-voltage, over-current, and over-temperature protection guard against mistakes damaging the supply or the circuit under test.
- Connector style – binding posts that accept standard banana plugs and alligator clips are the most flexible for bench use.
- Noise level – a temperature-controlled fan is quieter at idle than a fan that runs continuously regardless of load.
Pick This If…
| If you… | Pick |
|---|---|
| Do general hobby electronics and repair work | A single-channel 0-20V/0-5A supply |
| Test small motors, LED arrays, or higher-draw circuits | A single-channel 0-20V/0-10A supply |
| Build or test op-amp or audio circuits needing symmetric rails | A dual-tracking 0-20V supply |
| Regularly switch between digital and analog projects | A triple-output bench supply |
| Need repeatable, logged test conditions | A programmable 0-20V supply with USB/serial control |
Alternatives to Consider
A wider-range 0-30V or 0-60V supply is worth the extra cost if you expect to work on higher-voltage projects down the road, though it’s unnecessary headroom for anyone staying within 20V circuits.
USB-C PD “trigger” or adjustable modules can substitute for a full bench supply on simple low-current projects that only need a fixed common voltage like 5V, 9V, 12V, or 20V, at a much lower cost and size than a full bench unit.
A linear-regulated 0-20V supply is the better choice over a switching unit for sensitive analog or RF testing where the lowest possible output ripple matters more than compact size or efficiency.
Frequently Asked Questions
Why is 0-20V such a common bench supply range?
It comfortably covers the voltages used by most common digital logic (3.3V, 5V) and many analog and small-motor circuits (12V, 15V, 18V) without the added size, cost, and sometimes safety margin needed for higher-voltage ranges like 0-30V or beyond. Most hobbyist and repair work simply never needs to go above 20 volts.
What does CV/CC mode mean on a bench supply?
CV (constant voltage) mode means the supply is holding your set voltage steady and current draw is within the limit you set; CC (constant current) mode means the load is trying to draw more current than your set limit, so the supply has capped current and voltage has dropped. Seeing the supply unexpectedly switch into CC mode is often the first clue that a circuit has a short or an unexpectedly low-resistance path.
Do I need a dual-tracking supply for audio projects?
Only if your circuit specifically needs a symmetric positive and negative voltage rail, which is common in op-amp-based audio and analog designs. Purely digital projects or single-rail analog circuits don’t need this feature and can use a standard single-channel supply.
How much current headroom should I buy?
Check the maximum current your actual projects draw and add a reasonable safety margin, rather than buying the highest current rating available. Most small electronics work comfortably within 2-5A, while motors, high-power LED strings, or battery charging may call for 5-10A or more.
Is a switching or linear 0-20V supply better?
A switching supply is lighter, more efficient, and generally less expensive per amp, which suits the vast majority of digital and general electronics work. A linear supply produces less output ripple and is the better choice specifically for sensitive analog or RF circuits where that extra noise could affect results.
What protection features should a 0-20V supply have?
Look for over-voltage protection, over-current protection, and over-temperature protection as a baseline, since these guard the supply and the circuit under test against wiring mistakes or unexpected shorts. The maker’s specification sheet or manual will list which protections are built into a given model.
Related articles
- Best D Tap Power Supply: Picks and What to Look For (2026)
- Best Switching DC Power Supply: Picks and What to Look For (2026)
- Best Portable Adjustable DC Power Supply: Picks and What to Look For (2026)
- Best 500V DC Power Supply: Picks and What to Look For (2026)
- Best Memory Cards for 4K Video: Picks and What to Look For (2026)
- Best CPU for Gtx 1070: Picks and What to Look For (2026)