Key takeaways
- A 36V DC power supply is the right pick for driving specific loads rated at that voltage, such as certain LED strip runs, small motors, CCTV camera…
A 36V DC power supply is the right pick for driving specific loads rated at that voltage, such as certain LED strip runs, small motors, CCTV camera systems, and industrial control circuits, and the main decision is matching the supply’s current rating and form factor to the load rather than chasing a particular brand. Because 36V sits between the far more common 12V/24V and 48V standards, the selection is narrower, and getting the amperage and mounting style right matters more than it does in more crowded voltage classes.
Who Needs a 36V Supply
Three groups typically search for this voltage. Hobbyists and small-business installers running LED strip lighting designed for 36V input, where longer runs at 36V suffer less voltage drop than the same run at 12V or 24V. Industrial and automation users powering specific motors, actuators, sensors, or control panels that the equipment maker specifies at 36V. And security or access-control installers working with camera or gate systems whose manufacturer documentation calls for a 36V feed. In every case, the governing rule is the voltage printed on the end device’s nameplate or spec sheet, not a preference for one voltage over another.
At a Glance: 36V DC Power Supply Types
| Type | Best For | Key Stated Specs | Limits |
|---|---|---|---|
| Enclosed switching supply (DIN rail or chassis mount) | Industrial panels, automation, permanent installs | Maker-listed output commonly 5-15A, metal enclosure, screw terminals | Needs panel space and proper ventilation; not plug-and-play |
| Open-frame switching supply | OEM integration inside existing enclosures | Maker-listed output varies widely, PCB-mount design | Exposed components; must be installed inside a protective enclosure |
| Desktop / adapter-style supply | Low-current bench or small-device use | Maker-listed output typically under 3A, barrel or terminal output | Limited to lighter loads; not suited to sustained industrial duty |
| LED-specific constant-voltage driver | 36V-rated LED strip runs | Maker-listed wattage sized to strip length, IP-rated versions for damp areas | Not interchangeable with general-purpose supplies lacking the same regulation behavior |
What to Check Before You Buy
Current (Amperage) Rating
Voltage alone does not size a power supply; the load’s total current draw does. Add up the rated current of every device the supply will feed, then choose a supply rated comfortably above that total, since running a supply at its absolute maximum continuously shortens its service life. Many installers target roughly 20 to 25 percent of headroom above calculated load for continuous-duty applications.
Input Voltage and Region
Confirm the supply accepts the local mains voltage and frequency, and check whether it is a fixed-input or universal-input (auto-switching) design. A supply built for a different region’s mains voltage will not operate correctly, and in some cases attempting to run it on the wrong input range can damage the unit.
Enclosure and Mounting Style
DIN rail and chassis-mount enclosed supplies suit control cabinets and permanent installs where dust, moisture, or accidental contact are concerns. Open-frame supplies are meant to be built into another enclosure, not exposed on their own. For outdoor or damp-location LED or security work, confirm the unit carries an IP rating appropriate to the environment.
Regulation Type: Constant Voltage vs. Constant Current
Most general-purpose 36V supplies are constant-voltage, holding 36V output while current varies with load, which suits LED strips, control electronics, and most motors designed for constant-voltage operation. Constant-current supplies behave differently and are generally reserved for specific LED or laser diode applications that call for it by name; check the end device’s documentation before assuming one type will substitute for the other.
Fit and Installation Notes
- Verify terminal or connector type matches the wiring already in place, or budget for compatible connectors and crimps.
- Check physical dimensions against available panel or enclosure space, including clearance for airflow around ventilation slots.
- For LED strip runs, calculate voltage drop over the full cable length and consider feeding power from both ends of long runs rather than relying on a single higher-current supply at one end.
- Confirm local electrical code requirements for permanent installations, especially where the supply feeds fixed building wiring rather than a portable device.
Pick This If…
| Situation | Suggested Type |
|---|---|
| Permanent industrial panel or automation install | Enclosed DIN rail or chassis-mount switching supply |
| Building a device and integrating power internally | Open-frame switching supply, inside a protective enclosure |
| Bench testing or a single low-current device | Desktop / adapter-style supply |
| Long 36V LED strip run | LED-specific constant-voltage driver sized to strip wattage |
Alternatives Worth Considering
If the end device actually tolerates a voltage range rather than a strict 36V point, a more common 24V or 48V supply paired with the device’s built-in regulation may work and opens up a wider selection; always confirm the device’s acceptable input range in its documentation before substituting voltages. For LED projects specifically, some installers find that redesigning the run for a more universally available 24V constant-voltage system, with appropriate wire gauge for the run length, avoids the narrower 36V product selection entirely. For industrial control applications, a modular DIN rail supply system that offers a 36V output module alongside other voltages on the same rail can simplify sourcing for panels that need multiple voltage rails.
Frequently Asked Questions
Can I use a 24V or 48V supply instead of 36V?
Only if the end device’s documentation explicitly lists a tolerance range that includes that voltage. Many electronics, motors, and LED strips are designed for a specific voltage and can be damaged or underperform outside that rating, so always check the device’s spec sheet rather than assuming substitution is safe.
How do I calculate the amperage I need?
Add together the rated current draw of every connected device, then add a safety margin, commonly 20 to 25 percent, for continuous-duty use. For LED strips, this is usually calculated from watts per meter times total strip length, divided by the supply voltage.
What is the difference between open-frame and enclosed supplies?
Open-frame supplies are bare circuit boards meant to be mounted inside another protective enclosure, while enclosed supplies come in a finished metal or plastic housing suitable for exposed mounting in a panel or cabinet. Open-frame units are generally not safe to use without additional enclosure protection.
Do I need a constant-voltage or constant-current supply?
Most general-purpose 36V loads, including typical LED strips and control electronics, use constant-voltage supplies. Constant-current supplies are reserved for specific applications like certain LED arrays or laser diodes that the manufacturer specifies by name, so check the device’s documentation before choosing.
Why is voltage drop a concern on long LED runs?
As current travels through wire, resistance causes a voltage drop proportional to the run length and current draw, which can make the far end of a long LED strip noticeably dimmer than the near end. Using thicker wire gauge, feeding power from both ends, or choosing a higher supply voltage for the same wattage can all reduce this effect.
Is it safe to run a power supply near its maximum rated output continuously?
Running at or near maximum continuously generates more heat and can shorten the supply’s service life. Most installers size the supply with headroom above the calculated load rather than matching the rating exactly to expected draw.
Related articles
- Best 36V 20a Power Supply: Picks and What to Look For (2026)
- Best 3 Output Power Supply: Picks and What to Look For (2026)
- Best Atx 600W Power Supply: Picks and What to Look For (2026)
- Best 12 Volt Adjustable Power Supply: Picks and What to Look For (2026)
- Best Graphics Cards Gpus Affordable: Picks and What to Look For (2026)
- Best Asus Graphics Cards Gpus: Picks and What to Look For (2026)