Updated Nov 16, 2026· 9 min read

Key takeaways

  • The moment of truth with an ATV ramp happens at the tailgate: a heavy machine, a narrow set of runners, and a rider walking alongside with one hand on the…

The moment of truth with an ATV ramp happens at the tailgate: a heavy machine, a narrow set of runners, and a rider walking alongside with one hand on the bars. A good set of loading ramps turns that moment into a routine step, while a poor match for your truck bed height or quad weight turns it into a gamble. This guide looks at five ramp options so you can match the design to the machine and the vehicle you actually own.

Before you shop, write down three numbers: the loaded weight of the machine, the height of the deck, and the width between the tire centers. Those three decide almost everything. Most buyers end up choosing between a pair of separate runners and a single wide ramp, and between folding designs that store easily and fixed ones that stay rigid. The picks below cover both approaches. Because only the product names are used as facts, the sections that follow focus on the buying rules that decide whether any ramp is safe for your quad, truck, and trailer.

Quick Picks

Product Best for Worth knowing
Black Widow Aluminum Folding Arched ATV Ramps Pickup owners who want a pair that stores compactly Aluminum, folding, and arched according to the name
Titan Ramps Aluminum Folding Arched Dual Runner ATV Ramps Riders who like two separate runners Dual runner layout means you align both tracks yourself
Rage Powersports Folding ATV Ramps Weekend riders with limited garage space Folding design trades some rigidity for storage
Goplus Folding Aluminum ATV Ramp Occasional loading with a lighter carry Single ramp listing, so check the width against your tires
Erickson Big Boy II ATV Ramp Owners wanting a larger ramp for a bigger machine Name points to a heavy-duty model, so confirm the rating

How to Choose

Match the weight rating to the loaded vehicle

Add the dry weight of the quad, fuel, any cargo on the racks, and the rider if you plan to ride up. A good rule of thumb is to pick a ramp or pair whose posted capacity is at least 25 percent above that total. Weigh the machine on a scale if you modified it with a winch, bumper, or heavy tires, since those additions can push the real number well past the brochure figure. Check whether the rating applies to the pair combined or to each runner, because manufacturers phrase it both ways and the difference is large.

Choose length by bed height

A steep ramp is where tipping and bottoming out start. As a general guide, aim for a ramp length of at least three times the height of the tailgate or trailer deck, which keeps the angle under roughly 20 degrees. Taller trucks with lift kits need longer ramps, and short ramps are better reserved for low trailers. Measure from the ground to the deck with the truck parked on level pavement, not on a sloped driveway, because slope changes the real height.

Look at arch and approach angle

An arched profile lifts the middle of the ramp so the belly of the quad does not hang up at the crest. If your machine has a low skid plate or a long wheelbase, the arch matters as much as the length. A flat ramp is acceptable only when the ramp is long and the deck is low. Sit the ramp against the deck and look from the side: if daylight disappears under the middle, expect scraping.

Check width, traction, and hold-down hardware

Each runner should be wide enough for the tire tread, with edges that stop a tire from sliding off sideways. Look for a perforated or serrated surface and a lip or strap anchor at the top that locks onto the tailgate or deck. If the ramp can slip at the top edge, strap it before every load. Rubber feet at the bottom end also help on pavement, while gravel and wet grass call for a flat board under the ramp feet.

Our Picks Reviewed

Black Widow Aluminum Folding Arched ATV Ramps

Black Widow 7' 5" ATV Loading Ramps 1,500 lb Cap | Aluminum, folding, anti-slip surface, for pickup truck bed, trailer

Black Widow 7' 5" ATV Loading Ramps 1,500 lb Cap | Aluminum, folding, anti-slip surface, for pickup truck bed, trailer

Loading Ramps
Black Widow
amazon.com
In Stock
Updated: 4 days ago
Price as of Nov 16, 2026. We earn from qualifying purchases.

As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated.

The name describes three useful traits in one line: aluminum construction, a folding design, and an arched profile. That combination is what most truck owners picture when they search for loading ramps for a quad.

  • Pro: an arched design generally helps the underside of the machine clear the break between ramp and tailgate.
  • Pro: folding ramps usually store in a bed corner or garage rack, which suits owners who load a few times a season.
  • Con: folding hinges are a point of wear, so inspect the fold area for bends or cracks before every load.

Also keep in mind that folding aluminum pairs are often compared by how flat they pack, so measure your storage space first. Skip it if your quad is near the top of the weight range for aluminum ramps, or if you need a single wide ramp that rolls up a trailer without aligning two separate runners.

Titan Ramps Aluminum Folding Arched Dual Runner ATV Ramps

Titan Ramps 2 Pack 10' Folding ATV Loading Ramp, 800 lb Capacity, Black | Arched Aluminum, Portable and Heavy-Duty Ramp for Pickup Trucks

Titan Ramps 2 Pack 10' Folding ATV Loading Ramp, 800 lb Capacity, Black | Arched Aluminum, Portable and Heavy-Duty Ramp for Pickup Trucks

Loading Ramps
Titan Ramps
amazon.com
In Stock
Updated: 4 days ago
Price as of Nov 16, 2026. We earn from qualifying purchases.

As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated.

This listing spells out a dual runner format, which means two separate tracks rather than one wide surface. The aluminum folding arched wording places it in the same family as other mainstream truck-bed ramps.

  • Pro: two runners can be spaced to match the track width of your machine, which helps on wider side-by-sides and narrow quads alike.
  • Pro: the arched shape is a category-level advantage when the deck is high and the approach angle is tight.
  • Con: dual runners require careful alignment, so loading alone takes a little more practice and a steady throttle hand.

Many owners keep a short strap handy to tie both runners together at the top so they cannot spread apart. Skip it if you load by yourself in a rush and want a single surface that forgives a crooked approach, or if you store gear in a very small space.

Rage Powersports Folding ATV Ramps

The name tells you the brand targets powersports owners and that the ramps fold. Beyond that, treat it as a general-purpose set and verify rating and length against your own vehicle.

  • Pro: folding ramps are easy to carry and slide into storage between trips, which suits seasonal riders.
  • Pro: a ramp set sold for powersports use is usually sized with quads and side-by-sides in mind, not just wheelbarrows or mowers.
  • Con: the name does not state material or arch, so confirm those details and the posted capacity before relying on it for a heavy machine.

Because the details are not in the name, read the sticker on the ramp and keep the manual in the glovebox. Skip it if you need a clearly arched profile for a tall tailgate or a documented capacity for a large utility ATV, and do not want to double-check specifications.

Goplus Folding Aluminum ATV Ramp

A single-ramp listing with aluminum and folding in the name. The singular wording matters: you may be buying one ramp, so check what is included before you order a pair for two-sided loading.

  • Pro: aluminum ramps resist rust and are usually easier to lift than steel when you need to move them by hand.
  • Pro: folding lets you stow it in a trailer or truck bed without a rack, which is useful for riders who also haul gear.
  • Con: one ramp means one track, so tires on the other side must still have a safe path, and wider machines can feel unstable.

Plan to carry a second ramp or a stout board if you decide you need support under the opposite tire. Skip it if you want matched runners for a wide stance, or if your quad is heavy enough that you want a documented pair rating rather than a single-ramp rating.

Erickson Big Boy II ATV Ramp

The Big Boy II name suggests a larger or heavier-duty option in the Erickson line. As with any ramp, read the label for length, width, and capacity rather than assuming from the name.

  • Pro: a ramp marketed as a bigger option is typically aimed at larger quads and utility machines that stress smaller ramps.
  • Pro: a single, wider track can make straight-line loading feel steadier than two thin runners for some riders.
  • Con: larger ramps are heavier and bulkier to store, so plan a rack or wall space before you buy.

Load the quad slowly and keep the ramp angle low to take full advantage of the extra size. Skip it if you have a compact truck with little room for storage or if you want the lightest possible ramp to throw in a bed for occasional trips.

Which One Fits

  • Truck owners who ride a few times a season: the Black Widow folding arched pair is the easiest to store.
  • Riders with a wide side-by-side or a custom stance: the Titan dual runner layout lets you set the spacing.
  • Budget-minded or occasional loaders: the Rage Powersports and Goplus folding options cover short, simple loads.
  • Owners of larger utility machines: look closely at the Erickson Big Boy II and confirm capacity in writing.

Common Mistakes

  • Ignoring the combined weight of the quad, cargo, and rider, then trusting a ramp rating that applies only to one runner instead of the whole pair.
  • Buying a short ramp for a tall bed, which forces a steep angle and risks scraping the skid plate.
  • Forgetting to strap or latch the top of the ramp to the tailgate or deck before the quad starts to climb.
  • Loading in wet conditions without checking tire and ramp traction, especially on smooth aluminum surfaces or when boots and tires are covered in mud.
  • Skipping inspection of hinges, welds, and the top lip after the ramp has been stored for months, when corrosion or a small bend may have appeared.

FAQ

How long should an ATV loading ramp be?

A common guideline is a length of about three times the height of the loading surface. For a thirty-inch tailgate that points to a ramp of around seven and a half feet, and longer is better for lifted trucks.

Are folding ramps strong enough?

They can be, as long as the posted rating covers your quad and gear and the hinge area is intact. Inspect the fold before each use, because that is where fatigue shows up first.

Do I need one ramp or two?

Two runners give separate paths for the left and right tires, while a single wide ramp lets you drive straight with fewer alignment worries. Choose based on tire spacing and how often you load alone.

What else helps a loading job go smoothly?

Good tie-down hardware matters as much as the ramp. If you also need to clean off the mud afterward, the guide to car detailing pressure washers covers equipment for that job.

Can I store ramps outside?

Aluminum resists rust, but long exposure to sun and weather can still age straps and hinges. If you keep a trailer or camper outdoors, a protective cover such as those in this roundup of RV covers can help guard your gear too.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best ATV Ramps for Loading: Folding and Arched…Check price on Amazon